MHP JNR4DD-N

Exclusive patented H type stainless steel dual burner and venturi assembly. Burner gas ports are uniform in size and shape, providing uniform flame on each port. Entire venturi is made of stainless steel, has a built-in Spider Guard, and are bolt-on. Fits JNR and GJK

Part Number: HH-DSB13AM
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model JNR4DD-N.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).

Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0

Stainless steel cooking grid for JNR. JNR4 Series standard cooking grid is made of 1/4” stainless steel rods which are extremely durable and easy to clean. Each panel measures 15 1/2” x 9 15/16”.

Sold individually.

Part Number: HH-SSGRID2
Dimension Front-to-Back: 15 1/2”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 3.2

Premium grade stainless steel rock grate with 1/4” rods for WNK & TJK model grills for MHP model JNR4DD-N.

Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5

JNR Deflector Shield For Control Panel for MHP model JNR4DD-N.

Part Number: HH-DEF
Weight: 1.0

Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IB
Weight: 0.2

Flat washer for igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-M17
Weight: 0.1

12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-ERIW
Weight: 0.3

Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-EIB
Weight: 0.2

Stainless steel grease cup for JNR, WNK, and TJK for MHP model JNR4DD-N.

Part Number: GG-GC
Weight: 0.3

Main control knob for JNR, WNK, TJK.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 7/8”
• Socket diameter: 5/16”
• Knob shaft: 1/4”

Part Number: GG-K10
Weight: 0.2

Propane Valve for JNR for MHP model JNR4DD-N.

Part Number: HH-VLV28
Weight: 0.4

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

BBQ'er choice porcelain grill briquets. The finest available.

• Self-Cleaning Porcelain Briquettes.
• Made of fired porcelain for even heat transfer.
• Virtually indestructible.
• About 56 pieces covers approximately 310 square inches.
• Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3