Home > MHP Grill Models > MHP WNK4
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement gas grill parts for MHP model: WNK4
WNK4 Burners
Stainless steel twin H burner and venturi assembly. Includes:
- One (1) twin SS H burner.
- Two (2) SS twist lock venturi.
- Built-in spider guards.
- Sold as assembly only, burner and venturi not available seperately.
Part Number: GG-DLB13TL
Dimensions: 19 1/2” x 8”
Weight: 3.0
$73.53
WNK4 Venturis
SS twin venturi. For use with GG-DLB and HH-DSB H burners. Includes gaskets and hardware, and spider guards. Fits JNR, WNK, and TJK grills.
Part Number: GG-DV13
Material: stainless steel
Weight: 1.0
$19.80
WNK4 Cooking Grids
SearMagic
Cooking Grids for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G.
- High Performance, Rust-Free Anodized Aluminum Cooking Grids.
- Sold individually, number required varies
This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8 1/2”
Material: Anodized Aluminum
Weight: 2.2
$74.58
Heavy-duty stainless steel
cooking grid for GJK, WNK, and TJK series grills.
- High grade stainless
- 5/16” solid stainless rods
- Sold individually.
Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0
$102.11
WNK4 Rock Grates
Stainless steel, 304 grade,
rock grate with 1/4” rods for WNK & TJK model grills. Replaces former porcelain steel
rock grate # GG-GRATE-P.
Part Number: GG-GRATE-SS
Dimensions: 13 5/8” x 22 1/8”
Material: stainless steel
Weight: 5.00
$81.49
WNK4 Heat Plates
Deflector Shield for Control Panel WNK/TJK for MHP model WNK4.
Part Number: GG-DEF
Dimension Front-to-Back: 4”
Dimension Side-to-Side: 20 11/16”
Material: stainless steel
Weight: 0.96
$12.12
WNK4 Igniter Components
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IB
Weight: 0.2
$13.11
Flat washer for igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-M17
Weight: 0.1
$0.83
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB
Weight: 0.2
$31.52
WNK4 Grease Trays
Stainless steel grease cup for JNR, WNK, and TJK for MHP model WNK4.
Part Number: GG-GC
Weight: 0.3
$11.37
WNK4 Grill Covers
Premium quality polyester lined vinyl cover, E-Z on velcro tabs. For large grills, full length.
- 60” left to right
- 20” front to back
- 42” top to bottom
Please measure your grill to determine which cover fits best. Avoid too snug a fit as a slightly oversized cover is easier to take off and put back on.
Part Number: CV4PREM
Material: Vinyl
Weight: 3.5
$70.78
WNK4 Knobs and Handles
Handle end caps, set of two # GG-SHC, for right and left side of stainless steel handle, with screws & gaskets for JNR, TJK, TRG, WNK, WRG.
Also included in handle kit
GG-HANKIT.
Part Number: GG-SHC-SET
Weight: 0.3
$16.45
Main control knob for JNR, WNK, TJK.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/4”
Part Number: GG-K10
Weight: 0.2
$4.37
WNK4 Warming Racks
Stainless Steel swing away warming rack for MHP model WNK4.
Part Number: GG-TS
Weight: 1.0
$50.25
WNK4 Heat indicators and Meat Thermometers
Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.
- 2 1/2” diameter.
- Single prob
- Requires 3/8” mounting hole
Part Number: GG-TG4
Weight: 0.15
$21.23
Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.
Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15
$11.37
WNK4 Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$40.54
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60