Home > Sterling Grill Models > Sterling 565164
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts to fit Sterling model: 565164
565164 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
565164 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
565164 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 565164.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
565164 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Sterling electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Genuine OEM Sterling 32 wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
565164 Grease Trays
Grease tray 440; porcelain flatte matte finish for Sterling model 565164.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
GREASE PAN - 330/440/550 for Sterling model 565164.
Part Number: 52009-901
Dimensions: 5 1/8 x 6 1/2
Weight: .40
$15.11
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 565164.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
565164 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 565164.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8
- Socket diameter: 5/16
- Knob shaft: 1/2
Part Number: 10472-K231
Weight: 0.1
$5.15
565164 Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
565164 Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Sterling model 565164.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Sterling model 565164.
Part Number: 10240-13
Weight: .10
$2.23
565164 Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8 and front support rod 26 3/16 warming rack 7 3/8 x 25) for Sterling model 565164.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
565164 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
565164 Miscellaneous Repair Parts
Cotter pin for Sterling model 565164.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Sterling model 565164.
Part Number: S21233
Weight: 0.01
$1.08
565164 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 565164.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Sterling model 565164.
Part Number: Y-11231
Weight: 0.01
$1.08
565164 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59