Home > Sterling Grill Models > Sterling 566347
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts to fit Sterling model: 566347
566347 Burners
Genuine OEM Sterling stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Rear burner tubular with deflector; includes collector box, electrode and connector wire for Sterling model 566347.
Part Number: 27906-354
Dimensions: 32
Weight: 1.0
Image not available
$33.13
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
566347 Cooking Grids
COOKING GRID SINGLE SS 330/440/550; SOLD INDIVIDUALLY for Sterling model 566347.
Part Number: 52005-284
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 3.2
Image not available
$47.90
566347 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave for Sterling model 566347.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
566347 Igniter Components
COLLECTOR BOX ASSEMBLY 625
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52226-014A
Weight: 1.0
Image not available
$12.82
Genuine OEM Sterling push-button electronic ignitor.
- 5 spark outlets (spade connectors)
- Uses AAA battery (not included)
- Requires 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-251
Weight: 0.5
$19.43
Genuine OEM Sterling electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
566347 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE PAN - 330/440/550 for Sterling model 566347.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 566347.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
566347 Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Sterling model 566347.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
566347 Regulators and Hoses
Genuine OEM Sterling NG gas hose for Sterling model 566347.
Part Number: 10111-K45
Weight: 2.1
$88.64
566347 Valves, Orifices, and Manifolds
CONTROL ASSY 5V S/B R/B NG + for Sterling model 566347.
Part Number: 59006-077
Weight: 1.0
Image not available
$108.94
566347 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
566347 Miscellaneous Repair Parts
REAR BURNER SPRING for Sterling model 566347.
Part Number: S21362
Weight: 1.0
$1.08
Cotter pin for Sterling model 566347.
Part Number: Y-11230
Weight: 0.01
$1.08
Hinge pin clip for Sterling model 566347.
Part Number: S21233
Weight: 0.01
$1.08
566347 Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 566347.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Sterling model 566347.
Part Number: Y-11231
Weight: 0.01
$1.08
566347 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73