Home > Sterling Grill Models > Sterling 5896-86
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sterling grill.
Replacement grill parts for Sterling model: 5896-86
5896-86 Burners
Genuine OEM Sterling Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
5896-86 Cooking Grids
Aftermarket reversible heavy cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
- Pointed side is designed for perfect sear marks
- Grooved side captures juices for continous basting
Fits: Broil King 500/625/750 series grills.
NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.
Part Number: 22005-281-R
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 6 1/16”
Material: Cast iron
Weight: 5.0
$31.20
Genuine OEM Sterling side burner grid for Sterling model 5896-86.
Part Number: 10225-T10
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 8 3/8”
Weight: 2.4
$25.62
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.
Part Number: 67845-1PC
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 6 1/16”
Material: matte cast iron
Weight: 5.5
$36.73
Cast iron
cooking grids,
porcelain treated, flat matte finish for Sterling model 5896-86.
Part Number: 67845
Dimension Front-to-Back: 19 3/16”
Dimension Side-to-Side: 30 5/16”
Material: matte cast iron
Weight: 27.2
$152.39
5896-86 FLAV-R-WAVE
Genuine OEM Sterling stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
5896-86 Igniter Components
Genuine OEM Sterling front collector box, top & bottom combo. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Fits 4-Burner grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22225-014A
Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2
$28.89
Genuine OEM Sterling 32” wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
Genuine OEM Sterling electronic push-button 3-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
Electronic push-button 1-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
- Also replaces part 10342-248
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-244
Weight: 0.3
$16.95
5896-86 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE SHIELD 250 .8MM 430 SS
Part Number: 27243-904
Dimensions: 8” x 13”
Weight: 1.0
Image not available
$11.51
Genuine OEM Sterling Porcelain Grease Pan for Sterling model 5896-86.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
5896-86 Knobs and Handles
Genuine OEM Sterling small control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 22001-668
Weight: 0.1
$12.32
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
S/B LID HANDLE WAGON ENCLOSER* for Sterling model 5896-86.
Part Number: PB20-60
Weight: 1.0
$1.95
5896-86 Regulators and Hoses
HOSE SIDE BRNR W/1.09 ORIFACE
Part Number: S13470-109
Weight: 1.0
Image not available
$22.04
5896-86 Wheels and Castors
Genuine OEM Sterling caster, locking for Sterling model 5896-86.
Part Number: 10892-25
Weight: 0.85
$12.71
5896-86 Warming Racks
Genuine OEM Sterling warming rack.
Porcelain enameled, glossy finish.
Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10
$41.14
WARMING RACK (SMALLER SIDE) PORCELAIN STEEL for Sterling model 5896-86.
Part Number: 22003-991
Dimensions: 8 5/8” x 12 1/2”
Weight: 1.65
$23.10
5896-86 Heat indicators and Meat Thermometers
Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
5896-86 Miscellaneous Repair Parts
Genuine OEM Sterling Cover, side burner for Sterling model 5896-86.
Part Number: 10393-K40
Dimensions: 14 7/8” x 11”
Material: stainless steel
Weight: 1.9
$18.73
Hinge pin clip for Sterling model 5896-86.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Sterling model 5896-86.
Part Number: S21362
Weight: 1.0
$1.08
5896-86 Hardware
LID BUMPER for Sterling model 5896-86.
Part Number: Y-11231
Weight: 0.01
$1.08
SCREW-PHCP 6-32X1/4 TY-F JS500 for Sterling model 5896-86.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
5896-86 Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59