Home > Thermos Grill Models > Thermos 42016402
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Thermos grill. This is best done with the old parts out of the grill. Verify your Thermos grill model number.
Replacement grill parts to fit Thermos model: 42016402
42016402 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 11602-72401
Dimensions: 15” x 4”
Material: stainless steel
Weight: 4.0
$58.83
Stainless steel oval burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 11602
Dimensions: 15” x 4”
Material: stainless steel
Weight: 1.5
$40.59
42016402 Venturis
Universal stainless venturi flexible and adjustable from 8” to 11” and sold individually. Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.
Part Number: 72401
Dimensions: 7 1/2” x 11”
Material: zinc plated steel
Weight: 0.3
$13.80
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
two venturi gaskets with screws for Thermos model 42016402.
Part Number: 00400
Dimensions: 3 1/16” x 1 1/4”
Weight: 0.05
$4.65
Single Gasket Kit Economy Burners for Thermos model 42016402.
Part Number: SHK4
Weight: 0.01
$4.02
42016402 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Thermos model 42016402.
Part Number: BG-28
Dimensions: 13 5/8” x 22 1/4”
Material: carbon steel
Weight: 4.5
$28.47
42016402 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Collector box. Mounts to the front of burners 14902 or 14701. Use original electrode or electrode 04500.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04600
Material: stainless steel
Weight: 0.3
$6.33 $4.04
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
$10.81
42016402 Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3
$17.36
42016402 Valves, Orifices, and Manifolds
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA Part Number: VLV-28
Material: brass
Weight: 1.1
$42.35
Brass
spud orifice with 5/16” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01
$6.95
42016402 Accessories
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65
$53.43 $47.71
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$40.54
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73