Viking VGBQ13603

029479-000-R-X3 U-Burner. Set of three (3). Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000-X3

Part Number: VIK-029479-000-R-X3
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 16.20

029479-000-R U-Burner. Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of two and three pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000

Part Number: VIK-029479-000-R
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 5.40

032285-000-R-X3 Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”GRILL, CKNG, GRATE, PORC”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 19 3/4” front-to-back
• 10” side-to-side

3-Piece set measures:

• 19 3/4” front-to-back
• 30” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 032285-000.

Replaces Viking factory part# VIK-032285-000-X3

Part Number: VIK-032285-000-R-X3
Dimension Front-to-Back: 19 3/4”
Dimension Side-to-Side: 30”
Material: stainless steel
Weight: 18.75

032285-000-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”GRILL, CKNG, GRATE, PORC”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 19 3/4” front-to-back
• 10” side-to-side

NOTE: Also available in a more economical 3-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 032285-000.

Replaces Viking factory part# VIK-032285-000

Part Number: VIK-032285-000-R
Dimension Front-to-Back: 19 3/4”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 6.25

032370-000-R-X5 Briquette Tray with briquettes. Set of five (5). Fits Viking Ultra Premium VGBQ and VGIQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Briquette Tray part 032370-000.

Made in USA

Replaces Viking factory part# VIK-032370-000-X5

Part Number: VIK-032370-000-R-X5
Dimensions: 18 1/8” x 5 7/16”
Material: stainless steel
Weight: 10.75

032370-000-R Briquette Tray with briquettes. Fits Viking Ultra Premium VGBQ and VGIQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of four, five, and six pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Briquette Tray part 032370-000.

Made in USA

Replaces Viking factory part# VIK-032370-000

Part Number: VIK-032370-000-R
Dimensions: 18 1/8” x 5 7/16”
Material: stainless steel
Weight: 2.15

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

VIK-PA020036-R Spark Module. 4-Spark electronic ignition module. Requires 1 AA battery (not included).

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA020036.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PA020036

Part Number: VIK-PA020036-R
Weight: .33

008091-000-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X3
Weight: 0.3

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40538
Material: chrome steel
Weight: 1.1

High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original
Made in USA

Part Number: CLA-AC0394
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43054
Weight: 0.1

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 71448
Weight: 0.2