Viking VGBQ300-2RE

PA080050-R1 U-Burner with Drip Shield. Deluxe heavy duty center-fed U burner.

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2004921-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in more economical multipacks of two, three, and four pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking original burner part PA080050 and Drip Shield part B2004921.

Replaces Viking factory part# VIK-PA080050

Part Number: VIK-PA080050-R1
Dimensions: 21 9/16” x 6 1/8”
Material: stainless steel
Weight: 5.10

PA080051-R1-X2 Stainless steel Smoker/Grill Burners with Drip Shields. SET OF TWO (2).

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shields B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051-X2

Part Number: VIK-PA080051-R1-X2
Dimensions: 24” x 1”
Material: stainless steel
Weight: 4.2

PA080051-R1 Stainless steel Smoker/Grill Burner with Drip Shield..

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in a more economical 2-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051

Part Number: VIK-PA080051-R1
Dimensions: 24” x 1”
Material: stainless steel
Weight: 2.1

PA060052-R Porcelain Steel Cooking Grates. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”Full Grill Grate”, this grate fits numerous Viking grills. See part PA060068-R for a stainless version.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side
• Solid steel 5/16” rods

NOTE: Also available in more economical 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060052.

Replaces Viking factory part# VIK-PA060052

Part Number: VIK-PA060052-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: porcelain steel wire
Weight: 8.3

PA060068-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”FULL GRATE *SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060052.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060068.

Replaces Viking factory part# VIK-PA060068

Part Number: VIK-PA060068-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: stainless steel
Weight: 8.6

PA060053-R-X2 Porcelain Steel Cooking Grates. SET OF TWO (2) heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”1/2 Grill Grate” or ”HALF GRILL GRATE”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060053.

Replaces Viking factory part# VIK-PA060053-X2

Part Number: VIK-PA060053-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: porcelain steel wire
Weight: 8.2

PA060053-R Porcelain Steel Cooking Grates. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”1/2 Grill Grate” or ”HALF GRILL GRATE”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in more economical 2-packs..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060053.

Replaces Viking factory part# VIK-PA060053

Part Number: VIK-PA060053-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: porcelain steel wire
Weight: 4.1

PA060069-R-X2 Premium quality heavy duty stainless steel cooking grates. SET OF TWO (2). Also known in Viking documentation as ”Half Grate SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060053. It is usually used with one or more PA060068 panels.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060069.

Replaces Viking factory part# VIK-PA060069-X2

Part Number: VIK-PA060069-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: stainless steel
Weight: 8.8

PA060069-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”Half Grate SS”, this grate fits numerous Viking grills. It is the stainless version of PA060052. It is usually used in pairs with one or more PA060068 panels

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in a more economical 2-pack..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060069.

Replaces Viking factory part# VIK-PA060069

Part Number: VIK-PA060069-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 4.4

E12G-SET Cast Iron Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners. Porcelain treated, flat matte finish.

Set includes:

• One (1) 002369-000-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 3/8” side-to-side

• Two (2) 002370-000-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts 002369-000 and 002370-000.

Part Number: VIK-E12G-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 22 7/8”
Material: cast iron
Weight: 19.7

PS2TG-SET Porcelain steel Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners.

• Porcelain enameled, glossy finish
• Large diameter 5/16” solid steel rods

Set includes:

• One (1) PA060052-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060053-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060052 and PA060052.

Replaces Viking factory part# VIK-PS2-SET

Part Number: VIK-PS2TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: porcelain steel
Weight: 16.5

SS2TG-SET Stainless steel Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Set includes:

• One (1) PA060068-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060069-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060068 and PA060069.

Part Number: VIK-SS2TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: stainless steel
Weight: 17.4

PK010061-R2 Flavor Grid. Fits Viking VGBQ/VGIQ E and T series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid part PK010061.

Replaces Viking factory part# VIK-PK010061

Part Number: VIK-PK010061-R2
Dimension Front-to-Back: 23 1/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 2.7

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008090-000-R Two prong Electrode. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008090-000-R
Weight: 0.25

PB040179-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040179-X2

Part Number: VIK-PB040179-R-X2
Weight: 0.2

PB040179-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040179

Part Number: VIK-PB040179-R
Weight: 0.1

Front and back burner mounting brackets for center-fed stainless U burner part# 15481 and VIKU1. Does not include screws. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: CLA-MS0059
Material: stainless steel
Weight: 0.4

6 chrome plated 18” shish-ke-bab skewers

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

economy basting brushes. Two brushes, 7.5” long.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43054
Weight: 0.1

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 41333
Material: stainless steel
Weight: 0.10

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 90963
Weight: 0.5