Viking VGBQ33603RE

029479-000-R-X3 U-Burner. Set of three (3). Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000-X3

Part Number: VIK-029479-000-R-X3
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 16.20

029479-000-R U-Burner. Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of two and three pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000

Part Number: VIK-029479-000-R
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 5.40

049498-000-R-X3 Premium quality heavy duty stainless steel cooking grates. SET OF THREE (3). Also known in Viking documentation as ”GRILL, CKNG, GRATE”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 19 3/4” front-to-back
• 10” side-to-side

3-Piece set measures:

• 19 3/4” front-to-back
• 30” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 049498-000.

Replaces Viking factory part# VIK-049498-000-X3

Part Number: VIK-049498-000-R-X3
Dimension Front-to-Back: 19 3/4”
Dimension Side-to-Side: 30”
Material: stainless steel
Weight: 19.75

049498-000-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”GRILL, CKNG, GRATE”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 19 3/4” front-to-back
• 10” side-to-side

NOTE: Also available in a more economical 2-pack, 3-pack and 4-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 049498-000.

Replaces Viking factory part# VIK-049498-000

Part Number: VIK-049498-000-R
Dimension Front-to-Back: 19 3/4”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 6.25

032370-000-R-X5 Briquette Tray with briquettes. Set of five (5). Fits Viking Ultra Premium VGBQ and VGIQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Briquette Tray part 032370-000.

Made in USA

Replaces Viking factory part# VIK-032370-000-X5

Part Number: VIK-032370-000-R-X5
Dimensions: 18 1/8” x 5 7/16”
Material: stainless steel
Weight: 10.75

032370-000-R Briquette Tray with briquettes. Fits Viking Ultra Premium VGBQ and VGIQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of four, five, and six pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Briquette Tray part 032370-000.

Made in USA

Replaces Viking factory part# VIK-032370-000

Part Number: VIK-032370-000-R
Dimensions: 18 1/8” x 5 7/16”
Material: stainless steel
Weight: 2.15

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Deluxe venturi brush with 11” coil spring flexible shaft

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 77310
Weight: 0.3