Viking VGBQ410-3RE2

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 
   Home > Viking Grill Models > Viking VGBQ410-3RE2



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Viking grill.

Replacement grill parts for the Viking VGBQ410-3RE2


 

VGBQ410-3RE2 Cooking Grates

002369-000-R-X2 Cast Iron Cooking Grates. SET OF TWO (2) panels. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

Each panel measures:
  • 23 1/4” front-to-back
  • 11 3/8” side-to-side
2-Piece set measures:
  • 23 1/4” front-to-back
  • 22 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 002369-000.

Replaces Viking factory part# VIK-002369-000-X2



Part Number: VIK-002369-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 22 3/4”
Material: cast iron
Weight: 18.6

$107.29

Qty
 




002369-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

NOTE: Also sold in more economical 2, 3 and 4 packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002369-000.

Replaces Viking factory part# VIK-002369-000



Part Number: VIK-002369-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 3/8”
Material: cast iron
Weight: 9.3

$59.56

Qty
 




002370-000-R-X2 Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”HALF” grates are paired with one or more FULL grates 002369-000.

Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side
2-Piece set measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000-X2



Part Number: VIK-002370-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 10.4

$84.24

Qty
 




002370-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”Half” grates are paired with one or more FULL grates 002369-000.

NOTE: Also sold in more economical 2-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000



Part Number: VIK-002370-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: cast iron
Weight: 5.2

$45.65

Qty
 




PS3TG-SET Porcelain steel Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners..

Set includes:

  • TWO (2) PA060052-R ”FULL” grate
    Each panel measures:
    • 23 1/4” front-to-back
    • 11 1/2” side-to--side

  • Two (2) PA060053-R ”HALF” grates
    Each panel measures:
    • 23 1/4” front-to-back
    • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060052 and PA060052.

Replaces Viking factory part# VIK-PS3-SET



Part Number: VIK-PS3TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/2”
Material: porcelain steel
Weight: 24.8

 $306.60

 $206.99

Qty
 




SS3TG-SET Stainless steel Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners.

  • Made in USA
  • 304 commercial grade stainless steel
  • Large diameter 5/16” solid stainless rods

Set includes:

  • TWO (2) PA060068-R ”FULL” grates
    Each panel measures:
    • 23 1/4” front-to-back
    • 11 1/2” side-to--side

  • Two (2) PA060069-R ”HALF” grates
    Each panel measures:
    • 23 1/4” front-to-back
    • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060068 and PA060069.



Part Number: VIK-SS3TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/2”
Material: stainless steel
Weight: 26
Image not available

 $189.99

Qty
 






 

VGBQ410-3RE2 Igniter Components

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

$5.35

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

$8.67

Qty
 




008091-000-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: VIK-008091-000-R-X3
Weight: 0.3

$47.11

Qty
 




008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: VIK-008091-000-R
Weight: 0.1

$17.02

Qty
 






 

VGBQ410-3RE2 Accessories

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59

Qty
 




Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.



NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

Qty
 




economy basting brushes. Two brushes, 7.5” long.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43054
Weight: 0.1

$5.77

Qty
 




Aluminum foil grilling trays. Package of three.
  • Heavy duty aluminum foil
  • Re-usable
  • Great for grilling delicate foods like fish and veggies


NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Qty
 




Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 71448
Weight: 0.2

$5.96

Qty
 





Viking grill model VGBQ410-3RE2. Some parts not specific to a grill brand or model like regulators, posts,
and heat indicators, which are listed in our repair parts section. 05-May-24

VGBQ4103RE2, VGBQ410-3RE2LSS, VGBQ410-3RE2NSS, VGBQ4103RE2LSS, VGBQ4103RE2NSS

We ship Viking BBQ parts worldwide

Back to Viking grill parts



GRILLING  ACCESSORIES
Briquettes & Lava Rock
Grill Covers
Grilling Tools
Basting and Cleaning brushes
Wood Chips and Smoker Trays
Grid Toppers, Griddles & Racks
Fish and burger baskets
Grill and Tank Accessories
Shish-kebab Sets & Skewers
Grilling & outdoor cooking books

Orders for Viking replacement grill parts of $49 and more get USA shipping (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

VIKING is a registered trademark of Viking Range, LLC, and is not affiliated with CLA Grills & Service in any way.
CLA sells aftermarket parts designed to fit Viking grills, not Viking branded products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy