Viking VGIQ410-3RE

PA080050-R1 U-Burner with Drip Shield. Deluxe heavy duty center-fed U burner.

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2004921-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in more economical multipacks of two, three, and four pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking original burner part PA080050 and Drip Shield part B2004921.

Replaces Viking factory part# VIK-PA080050

Part Number: VIK-PA080050-R1
Dimensions: 21 9/16” x 6 1/8”
Material: stainless steel
Weight: 5.10

PA080051-R1 Stainless steel Smoker/Grill Burner with Drip Shield..

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in a more economical 2-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051

Part Number: VIK-PA080051-R1
Dimensions: 24” x 1”
Material: stainless steel
Weight: 2.1

PA060052-R Porcelain Steel Cooking Grates. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”Full Grill Grate”, this grate fits numerous Viking grills. See part PA060068-R for a stainless version.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side
• Solid steel 5/16” rods

NOTE: Also available in more economical 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060052.

Replaces Viking factory part# VIK-PA060052

Part Number: VIK-PA060052-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: porcelain steel wire
Weight: 8.3

PA060068-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”FULL GRATE *SS*”, this grate fits numerous Viking grills. It is the stainless version of PA060052.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060068.

Replaces Viking factory part# VIK-PA060068

Part Number: VIK-PA060068-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: stainless steel
Weight: 8.6

PA060053-R Porcelain Steel Cooking Grates. Heavy duty grates with solid 5/16” rods. Porcelain enameled, glossy finish. Also known in Viking documentation as ”1/2 Grill Grate” or ”HALF GRILL GRATE”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in more economical 2-packs..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060053.

Replaces Viking factory part# VIK-PA060053

Part Number: VIK-PA060053-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: porcelain steel wire
Weight: 4.1

PA060069-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”Half Grate SS”, this grate fits numerous Viking grills. It is the stainless version of PA060052. It is usually used in pairs with one or more PA060068 panels

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

NOTE: Also available in a more economical 2-pack..

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA060069.

Replaces Viking factory part# VIK-PA060069

Part Number: VIK-PA060069-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 4.4

PK010061-R2 Flavor Grid. Fits Viking VGBQ/VGIQ E and T series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid part PK010061.

Replaces Viking factory part# VIK-PK010061

Part Number: VIK-PK010061-R2
Dimension Front-to-Back: 23 1/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 2.7

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

PB040176-R Two-prong Electrode. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040176

Part Number: VIK-PB040176-R
Weight: 0.25

PB040179-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040179-X2

Part Number: VIK-PB040179-R-X2
Weight: 0.2

PB040179-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040179

Part Number: VIK-PB040179-R
Weight: 0.1

Front and back burner mounting brackets for center-fed stainless U burner part# 15481 and VIKU1. Does not include screws. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: CLA-MS0059
Material: stainless steel
Weight: 0.4

6 chrome plated 18” shish-ke-bab skewers

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 63371
Weight: 0.2

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43108
Material: stainless steel
Weight: 0.10

economy basting brushes. Two brushes, 7.5” long.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 90963
Weight: 0.5