Viking VGIQ410-3RE2

002369-000-R-X2 Cast Iron Cooking Grates. SET OF TWO (2) panels. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 11 3/8” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 22 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 002369-000.

Replaces Viking factory part# VIK-002369-000-X2

Part Number: VIK-002369-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 22 3/4”
Material: cast iron
Weight: 18.6

002369-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

NOTE: Also sold in more economical 2, 3 and 4 packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002369-000.

Replaces Viking factory part# VIK-002369-000

Part Number: VIK-002369-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 3/8”
Material: cast iron
Weight: 9.3

002370-000-R-X2 Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”HALF” grates are paired with one or more FULL grates 002369-000.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000-X2

Part Number: VIK-002370-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 10.4

002370-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”Half” grates are paired with one or more FULL grates 002369-000.

NOTE: Also sold in more economical 2-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000

Part Number: VIK-002370-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: cast iron
Weight: 5.2

E13G-SET Cast Iron Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners. Porcelain treated, flat matte finish.

Set includes:

• Two (2) 002369-000-R ”FULL” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 3/8” side-to-side

• Two (2) 002370-000-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts 002369-000 and 002370-000.

Part Number: VIK-E13G-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/4”
Material: cast iron
Weight: 29.0

PS3TG-SET Porcelain steel Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners..

• Porcelain enameled, glossy finish
• Large diameter 5/16” solid steel rods

Set includes:

• TWO (2) PA060052-R ”FULL” grate
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060053-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060052 and PA060052.

Replaces Viking factory part# VIK-PS3-SET

Part Number: VIK-PS3TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/2”
Material: porcelain steel
Weight: 24.8

SS3TG-SET Stainless steel Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Set includes:

• TWO (2) PA060068-R ”FULL” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060069-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060068 and PA060069.

Part Number: VIK-SS3TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/2”
Material: stainless steel
Weight: 26

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2
Weight: 0.2

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40240
Material: chrome steel
Weight: 0.9

Deluxe 13” basting mop with hardwood handle and cotton mop head.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 42055
Dimensions: 13
Weight: 0.2

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 41333
Material: stainless steel
Weight: 0.10

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7