Viking VGIQ411-2RT1SS

PA080051-R1-X2 Stainless steel Smoker/Grill Burners with Drip Shields. SET OF TWO (2).

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shields B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051-X2

Part Number: VIK-PA080051-R1-X2
Dimensions: 24” x 1”
Material: stainless steel
Weight: 4.2

PA080051-R1 Stainless steel Smoker/Grill Burner with Drip Shield..

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in a more economical 2-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051

Part Number: VIK-PA080051-R1
Dimensions: 24” x 1”
Material: stainless steel
Weight: 2.1

002369-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

NOTE: Also sold in more economical 2, 3 and 4 packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002369-000.

Replaces Viking factory part# VIK-002369-000

Part Number: VIK-002369-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 3/8”
Material: cast iron
Weight: 9.3

002370-000-R-X2 Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”HALF” grates are paired with one or more FULL grates 002369-000.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000-X2

Part Number: VIK-002370-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 10.4

002370-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”Half” grates are paired with one or more FULL grates 002369-000.

NOTE: Also sold in more economical 2-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000

Part Number: VIK-002370-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: cast iron
Weight: 5.2

E12G-SET Cast Iron Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners. Porcelain treated, flat matte finish.

Set includes:

• One (1) 002369-000-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 3/8” side-to-side

• Two (2) 002370-000-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts 002369-000 and 002370-000.

Part Number: VIK-E12G-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 22 7/8”
Material: cast iron
Weight: 19.7

PS2TG-SET Porcelain steel Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners.

• Porcelain enameled, glossy finish
• Large diameter 5/16” solid steel rods

Set includes:

• One (1) PA060052-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060053-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060052 and PA060052.

Replaces Viking factory part# VIK-PS2-SET

Part Number: VIK-PS2TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: porcelain steel
Weight: 16.5

SS2TG-SET Stainless steel Cooking Grates. Complete SET OF THREE (3) panels for Viking 30” and 41” grills with side burners.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Set includes:

• One (1) PA060068-R ”FULL” grate
  Panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• Two (2) PA060069-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060068 and PA060069.

Part Number: VIK-SS2TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 23”
Material: stainless steel
Weight: 17.4

PK010061-R2 Flavor Grid. Fits Viking VGBQ/VGIQ E and T series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid part PK010061.

Replaces Viking factory part# VIK-PK010061

Part Number: VIK-PK010061-R2
Dimension Front-to-Back: 23 1/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 2.7

PB040287-R Two-prong Electrode. Also known in Viking documentation as ”GRILL BURNER IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040287.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Viking factory part# VIK-PB040287

Part Number: VIK-PB040287-R
Weight: 0.25

B040288-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R-X3
Weight: 0.3

PB040288-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-PB040288-R
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 41338
Weight: 1.1

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 00030
Weight: 0.1