Viking VGIQ530-4RE1

PA080051-R1-X2 Stainless steel Smoker/Grill Burners with Drip Shields. SET OF TWO (2).

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shields B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051-X2

Part Number: VIK-PA080051-R1-X2
Dimensions: 24” x 1”
Material: stainless steel
Weight: 4.2

PA080051-R1 Stainless steel Smoker/Grill Burner with Drip Shield..

• Made of 304 commercial grade stainless steel.
• Includes SS Drip Shield B2005324-R (attached).
• Includes front and rear mounting brackets.

NOTE: This part is also available in a more economical 2-pack.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original burner part PA080051 and Drip Shield part B2005324.

Replaces Viking factory part# VIK-PA080051

Part Number: VIK-PA080051-R1
Dimensions: 24” x 1”
Material: stainless steel
Weight: 2.1

002369-000-R-X3 Cast Iron Cooking Grates. SET OF THREE (3) panels. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

Each panel measures:

• 23 1/4” front-to-back
• 11 3/8” side-to-side

3-Piece set measures:

• 23 1/4” front-to-back
• 34 1/8” side-to-side

NOTE: Not a Viking branded product. This is an aftermarket part designed to replace original Viking grate part 002369-000.

Replaces Viking factory part# VIK-002369-000-X3

Part Number: VIK-002369-000-R-X3
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 34 1/8”
Material: cast iron
Weight: 27.9

002369-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - FULL”, this grate fits numerous Viking grills.

NOTE: Also sold in more economical 2, 3 and 4 packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002369-000.

Replaces Viking factory part# VIK-002369-000

Part Number: VIK-002369-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 3/8”
Material: cast iron
Weight: 9.3

002370-000-R-X2 Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”HALF” grates are paired with one or more FULL grates 002369-000.

Each panel measures:

• 23 1/4” front-to-back
• 5 3/4” side-to-side

2-Piece set measures:

• 23 1/4” front-to-back
• 11 1/2” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000-X2

Part Number: VIK-002370-000-R-X2
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 10.4

002370-000-R Cast Iron Cooking Grate. Porcelain treated, flat matte finish. Also known in Viking documentation as ”REDESIGN BBQ GRATE - HALF”, this grate fits numerous Viking grills. Usually two (2) of these ”Half” grates are paired with one or more FULL grates 002369-000.

NOTE: Also sold in more economical 2-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate part 002370-000.

Replaces Viking factory part# VIK-002370-000

Part Number: VIK-002370-000-R
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 5 3/4”
Material: cast iron
Weight: 5.2

E14G-SET Cast Iron Cooking Grates. Complete SET OF FOUR (4) panels for Viking 41” and 53” grills with side burners. Porcelain treated, flat matte finish.

Set includes:

• Two (2) 002369-000-R ”FULL” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 3/8” side-to-side

• Two (2) 002370-000-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts 002369-000 and 002370-000.

Part Number: VIK-E14G-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 45 5/8”
Material: cast iron
Weight: 38.30

PS4TG-SET Porcelain steel Cooking Grates. Complete SET OF FIVE (5) panels for Viking 53” grills..

• Porcelain enameled, glossy finish
• Large diameter 5/16” solid steel rods

Set includes:

• THREE (3) PA060052-R ”FULL” grate
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• TWO (2) PA060053-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060052 and PA060052.

Replaces Viking factory part# VIK-PS4-SET

Part Number: VIK-PS4TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 46”
Material: porcelain steel
Weight: 33.1

SS4TG-SET Stainless steel Cooking Grates. Complete SET OF FIVE (5) panels for Viking 53” grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Set includes:

• THREE (3) PA060068-R ”FULL” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 11 1/2” side-to--side

• TWO (2) PA060069-R ”HALF” grates
  Each panel measures:
  • 23 1/4” front-to-back
  • 5 3/4” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original VIKING grate parts PA060068 and PA060069.

Part Number: VIK-SS4TG-SET
Dimension Front-to-Back: 23 1/4”
Dimension Side-to-Side: 46”
Material: stainless steel
Weight: 34.6

PK010061-R2 Flavor Grid. Fits Viking VGBQ/VGIQ E and T series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Flavor Grid part PK010061.

Replaces Viking factory part# VIK-PK010061

Part Number: VIK-PK010061-R2
Dimension Front-to-Back: 23 1/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 2.7

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2
Weight: 0.2

Texas hickory flavor wood chips. 800g.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 00220
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 90963
Weight: 0.5