Viking VGIQ54224

029479-000-R-X2 U-Burner. Set of two (2). Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000-X2

Part Number: VIK-029479-000-R-X2
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 10.80

029479-000-R U-Burner. Stainless Steel Burner w/ Ignitor Bracket. Fits Viking VGBQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of two and three pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking burner part 029479-000.

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Mid May.

Replaces Viking factory part# VIK-029479-000

Part Number: VIK-029479-000-R
Dimensions: 19 1/2” x 6 3/4”
Material: stainless steel
Weight: 5.40

029434-000-R-X3 Premium quality heavy duty stainless steel cooking grates. SET OF THREE (3). Also known in Viking documentation as ”GRATE, BQ GRILL”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

3-Piece set measures:

• 22 3/4” front-to-back
• 34 7/8” side-to-side

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 029434-000.

Replaces Viking factory part# VIK-029434-000-X3

Part Number: VIK-029434-000-R-X3
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 34 7/8”
Material: stainless steel
Weight: 26.4

029434-000-R Premium quality heavy duty stainless steel cooking grate. Also known in Viking documentation as ”GRATE, BQ GRILL”, this grate fits numerous Viking grills.

• Made in USA
• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Sold individually.

Each panel measures:

• 22 3/4” front-to-back
• 11 5/8” side-to-side

NOTE: Also available in 2-packs, 3-packs, and 4-packs.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part 029434-000.

Replaces Viking factory part# VIK-029434-000

Part Number: VIK-029434-000-R
Dimension Front-to-Back: 22 3/4”
Dimension Side-to-Side: 11 5/8”
Material: stainless steel
Weight: 8.8

032370-000-R Briquette Tray with briquettes. Fits Viking Ultra Premium VGBQ and VGIQ series grills. May fit other models.

NOTE: This part is also available in more economical multipacks of four, five, and six pieces.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking Briquette Tray part 032370-000.

Made in USA

Replaces Viking factory part# VIK-032370-000

Part Number: VIK-032370-000-R
Dimensions: 18 1/8” x 5 7/16”
Material: stainless steel
Weight: 2.15

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03500
Weight: 0.05

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 03610
Weight: 0.05

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R-X2
Weight: 0.2

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: VIK-008091-000-R
Weight: 0.1

Skewers for part 92339 kebob tray.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 11040
Weight: 0.4

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 14950
Material: stailess steel
Weight: 0.5

Upright porcelain steel roasting rack with grid topper.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 40935
Weight: 2.9

Deluxe venturi brush with 11” coil spring flexible shaft

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace Viking original

Part Number: 77310
Weight: 0.3