Model: 311298

Stainless steel center burner for Weber Genesis I-IV. See part# WTB1 for complete burner kit.

Part Number: WTB-C
Material: stainless steel
Weight: 1.0
Dimensions: 29 1/8”

Front or rear stainless steel burner for Weber model 311298.

Part Number: 12801
Material: stainless steel
Weight: 1.3
Dimensions: 29 1/8” x 1”

Stainless steel burner kit. Includes:

• Two 29 1/8” tube burners for front and rear
• One 28 7/16” center tube burner
• One 13 1/2” stainless cross-over bar
• Spider exclusion screens on all burners

Part Number: 128C4
Material: stainless steel
Weight: 2.10
Dimensions: 29 1/8” x 13 1/2”

Stainless steel cross over tube for Weber model 311298.

Part Number: 129C1
Material: stainless steel
Weight: 0.13
Dimensions: 13 1/2

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 17 3/8”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 31 5/16”

Part Number: 53801-SS-X2
Material: stainless steel
Weight: 15.6
Dimensions:

• Front-To-Back: 17 3/8″
• Side-To_Side: 23 1/2″

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• 5/16” solid rods
• Sold individually

Fits: Beaumark, Broil-Mate, Broil King, Centro, Charbroil, Charmglow, Costco, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, John Deere, Kalamazoo, Kenmore, Kmart, Martha Stewart, Master Chef, Members Mark, Nexgrill, Patio Chef, S.R.Potten, Sams, Savor Pro, Sonoma, Sure Heat, Thermos, Uniflame, Vermont Castings, Wal Mart, Walmart, Weber. May fit others.

Part Number: 53801-SS
Material: stainless steel
Weight: 7.8
Dimensions:

• Front-To-Back: 17 3/8″
• Side-To_Side: 11 3/4″

Premium stainless steel cooking grids. Set of two (2). Channel formed, U-shaped. Fits Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700.

• 304 commercial grade stainless steel
• Channel formed is flat metal, rolled into a ”U”, or ”V” shape, not round rods
• Sold as a set of two.

Fits grills made by Weber. May fit others.

Part Number: 53812-SS
Material: stamped stainless steel
Weight: 6.0
Dimensions:

• Front-To-Back: 17 5/16″
• Side-To_Side: 23 1/2″

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 5/16”
• Side-to-Side: 11 11/16”

Total Side-to-Side: 23 3/8”

Part Number: 69112-UNI-X2
Material: cast iron
Weight: 14.7
Dimensions:

• Front-To-Back: 17 5/16″
• Side-To_Side: 23 3/8″

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69112-UNI-X2 for a set of two (2) grids.

Part Number: 69112-UNI
Material: cast iron
Weight: 7.35
Dimensions:

• Front-To-Back: 17 5/16″
• Side-To_Side: 11 11/16″

Channel formed U-shapped porcelain steel cooking grids. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 53812
Material: stamped porcelain steel
Weight: 6.0
Dimensions:

• Front-To-Back: 17 5/16″
• Side-To_Side: 23 1/2″

Cast iron cooking grids (set of 2). Porcelain treated, flat matte finish.

Part Number: 69112
Material: cast iron
Weight: 9.0
Dimensions:

• Front-To-Back: 17 3/16″
• Side-To_Side: 23 1/4″

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel for Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700. Channel formed means rolled steel stamped into a U-shape; is not solid round rods.

Part Number: CG-85SSET
Material: stamped stainless steel
Weight: 5.45
Dimensions:

• Front-To-Back: 17 5/16″
• Side-To_Side: 23 1/2″

Stainless steel replacement Flavor Bars for Weber Genesis. Constructed of heavy gauge stainless for long life, they are far superior to porcelain coated bars. Set of 13 pieces, five at 23 3/8”, eight at 15 7/8”.

Part Number: WFB
Material: stainless steel
Weight: 11.4
Dimensions:

• Front-To-Back: 15 7/8″
• Side-To_Side: 23 3/8″

13-pc porcelain steel Flavorisor Bars. Set of 13.

Part Number: 99813
Material: porcelain steel
Weight: 12.6
Dimensions:

• Front-To-Back: 23 3/8″
• Side-To_Side: 15 7/8″

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Material: plastic
Weight: 0.1
Dimensions: 1 5/8” x 1 5/8”

Chrome steel warming rack. This part is 24 3/8” at is absolute longest. The rack itself is 23”.

Part Number: 02346
Material: chrome steel wire
Weight: 1.4
Dimensions:

• Front-To-Back: 24 3/16″
• Side-To_Side: 3 11/16″

Brass LP valve and orifice (part #31600) to replace Weber OEM valve #11810007. Orifice has starter hole size #61 and must be drilled. Best to use old orifice and remove orifice included with this valve. D-Value for knob is 3 o'clock.

Part Number: 36400
Material: brass
Weight: 0.5
Dimensions: 3 9/16” x 2 1/4”

Bamboo Appetizer 7” Skewers - pack of eight. Limited to supplies on hand.

Part Number: 11040
Weight: 0.4
Dimensions: 7

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Non-Stick Aluminum Griddle. 19 in. x 10.75 in. Non-stick cast aluminum double sided griddle. One flat side for frying, and a ridge side for grilling.

Part Number: 91652
Material: aluminum
Weight: 3.0
Dimensions: 19 1/2” x 10 3/4”

GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.

The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanks—perfect for grilling, camping, patio heaters, and more
Made in USA

Part Number: 00030
Weight: 0.1