Every Valves, Orifices, and Manifold we have

1/8” FPT to replace hood orifice x 1/8” female compression fitting. Use with MCM valve 36800 for models that use a valve stud mount and female compression fitting with MCM 3692L or 3692N 1/4” aluminum tubing.

Part Number: 30068
Material: brass
Weight: 0.1

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Clamp-on valve. Does not include orifice. Uses orifice # 31300.

Part Number: 3052C
Dimensions: 4 1/2” x 2 3/8”
Material: brass
Weight: 0.5

Orifice for flame-thrower valves. 6mm head, 4.9mm thread diameter. #72 starter hole, must be drilled to proper drill size.

Part Number: 31300
Weight: 0.01

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

Small 7mm brass spud orifice. #72 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31500
Material: brass
Weight: 0.01

Brass spud orifice with 5/16” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01

Valve assembly.

Part Number: 31622
Weight: 1.0

Brass blunt-end hood orifice drilled to #64 starter hole. Fits valve 3701C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31700
Dimensions: 0 15/16” x 0 9/16”
Material: brass
Weight: 0.1

Brass long blunt-end hood orifice drilled to #64 starter hole. Fits valve 3042C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31800
Dimensions: 1 5/16” x 0 9/16”
Material: brass
Weight: 0.1

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

90° orifice elbow with two pal nuts and 1/4” compression fitting. For up-front control grills with 1/4” aluminum tubing connection to in-post mounted orifices. Accepts 11/32” x 32 spud orifices.

Part Number: 33900
Dimensions: 1 7/8” x 1 5/8”
Material: brass
Weight: 0.3

T manifold for twin valves with 3/8” male flare. Fits Charbroil late model grills with LP hoses crimped to the manifold.

Part Number: 34100
Dimensions: 2” x 1 5/16”
Material: brass
Weight: 0.3

Single brass valve with #56 orifice for Coastal and Wilmington Grills.

Part Number: 34700
Dimensions: 2 15/16” x 1 15/16”
Material: brass
Weight: 0.4

Double valve and manifold assembly for all Broilmaster up-front control natural gas models. Assembly includes left and right valve and manifold.

Part Number: 34900
Dimensions: 2 5/8” x 3 11/16”
Material: brass
Weight: 0.6

gas valve for use with natural or LP gas, 8mm diameter shaft, 12 o’ clock off position, shipped without orifice

Part Number: 35010
Dimensions: 2 1/16” x 1 1/4”
Weight: 0.5

Single Charmglow HEJ natural gas valve. Includes #30 orifice. Accepts 11/32” x 32 threaded orifice, MCM 33200, drilled to size.

Part Number: 35100
Dimensions: 2 5/8” x 2 3/16”
Material: brass
Weight: 0.5

VHR ASSEMBLY

Part Number: 35170189
Weight: 1.0

VHR ASSEMBLY

Part Number: 35170190
Weight: 1.0

VHR ASSEMBLY

Part Number: 35170191
Weight: 1.0

VHR ASSEMBLY

Part Number: 35170192
Weight: 1.0

Single Charmglow HEJ LP gas valve. Includes #49 orifice. Accepts 11/32” x 32 threaded orifice, MCM 33200, drilled to size.

Part Number: 35200
Dimensions: 2 11/16” x 2 3/16”
Material: brass
Weight: 0.5

Single Charmglow AMK and CC-1 LP gas valve. Includes #53 orifice. Accepts 11/32” x 32 threaded orifice, MCM 33200, drilled to size.

Part Number: 35400
Dimensions: 2 11/16” x 2 1/4”
Material: brass
Weight: 0.5

Charmglow LP gas plumbing tube with male compression fitting.

• Set of two
• Includes orifices (LP) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601L
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Charmglow natural gas plumbing tube with male compression fitting.

• Set of two
• Includes orifices (natural) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601N
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Natural gas plumbing tube for Charmglow 9250 with male compression fitting and #46 orifice for use with valve 36000. One pair. Provided straight; bend to fit.

Part Number: 3602N
Dimensions: 13
Material: aluminum
Weight: 0.2

Brass LP valve and orifice (part #31600) to replace Weber OEM valve #11810007. Orifice has starter hole size #61 and must be drilled. Best to use old orifice and remove orifice included with this valve. D-Value for knob is 3 o'clock.

Part Number: 36400
Dimensions: 3 9/16” x 2 1/4”
Material: brass
Weight: 0.5

Twin valve assembly to replace Charmglow OEM part #3512-0103, #3512-0104, #3512-0105, #3512-0101. Includes left and right valve and manifold. Orifice not included, use original or 11/32-32 blank drilled to size.

Part Number: 36500
Material: brass
Weight: 0.7

Charmglow LP gas 1/4” aluminum plumbing tubes with female compression fittings and #54 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.

Part Number: 3692L
Dimensions: 6
Material: aluminum
Weight: 0.1

Charmglow natural gas 1/4” aluminum plumbing tubes with female compression fittings and #46 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.

Part Number: 3692N
Dimensions: 6
Material: aluminum
Weight: 0.2

Clamp-on brass gas valve with straight outlet. Includes orifice.

• D-Value: 12 o'clock
• Stem diameter: 6mm
• Stem length: 1 3/4”

Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5

Clamp-on valve for Charbroil Professional series. Orifice not included. Stem: 6mmx 1 3/4”. D-Value is 12 o'clock

Part Number: 3701C
Dimensions: 4 1/4” x 1 7/16”
Weight: 0.5

Clamp-on brass gas valve for Charbroil.

• D-Value: 6 o'clock
• Stem diameter: 8mm
• Blank orifice included (with starter hole) or use original orifice.

Part Number: 3730C
Material: brass
Weight: 0.3

Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3

Clamp-on brass valve with 45° gas outlet.

• D-Value is 6 o'clock
• Stem diameter: 8mm (about 5/16”)
• Orifice included
• Orifice pre-drilled to #59. For LP, this is approximately 11,654 BTU per burner.

Part Number: 3742C
Dimensions: 4 3/8” x 1 5/8”
Material: brass
Weight: 0.5

Natural gas brass valve. Replaces Ducane OEM part #G1827575, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37700
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

LP brass valve. Replaces Ducane OEM LP gas valve part# G1827566, others. Orifice not included. Use original orifice or our part #37900 drilled to size.

Part Number: 37800
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3

Brass hood orifice with #72 starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1

3” valve shaft extender.

Part Number: 38000
Dimensions: 3 1/16” x 0 1/2”
Material: brass
Weight: 0.1

CONTROL ASSEMBLY 2V

Part Number: 38009-234
Weight: 1.0

Brass manifold for Charmglow model CC-1.

Part Number: 38300
Dimensions: 2 11/16” x 1 9/16”
Material: brass
Weight: 0.5

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

In post control valve without manifold or orifice, accepts accepts common 5/16” x 32 spud orifice. Fits Arkla and most twin in post control grills with spud orifice. Orifice not included.

Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3

In post control valve without manifold or orifice, with 1/8” NPT pipe thread for hood orifice. Fits Charbroil, Falcon, and most twin in post control grills with hood orifice. Orifice not included. Use original or our part #37900.

Part Number: 38800
Dimensions: 3 1/8” x 1 1/4”
Material: brass
Weight: 0.3

45° angled valve with extra long orifice snout. Accepts 11/32” x 32 threaded spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.

Part Number: 38900
Material: brass
Weight: 0.3

Left-hand valve of a left-right valve assembly. Believed to be original OEM Sunbeam parts.

• Includes #56 orifice
• D-Value is 12 o'clock
• Stem: 8mm x 1 9/16”
• 45°ree snout
• 1/8” NPT threads to manifold

Part Number: 4038LF
Material: brass
Weight: 0.4

Right-hand valve of a left-right valve assembly. Believed to be original OEM Sunbeam parts.

• Includes #56 orifice
• D-Value is 12 o'clock
• Stem: 8mm x 1 9/16”
• 45°ree snout
• 1/8” NPT threads to manifold

Part Number: 4038RF
Material: brass
Weight: 0.4

Side burner valve.

Part Number: 440-C335
Weight: 1.0

Genuine OEM valve assembly.

Part Number: 440-C500
Weight: 1.9

VALVE SIDE BURNER GBP

Part Number: 440-C501
Weight: 1.0