Home > Charmglow Grill Models > Charmglow E408M6
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charmglow grill.
Replacement grill parts for the Charmglow E408M6
E408M6 Venturis
two venturi gaskets with screws for Charmglow model E408M6.
Part Number: 00400
Weight: 0.05
Dimensions: 3 1/16” x 1 1/4”
Single Gasket Kit Economy Burners for Charmglow model E408M6.
Part Number: SHK4
Weight: 0.01
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
E408M6 Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 11 3/8”
Total Side-to-Side: 22 3/4”
Part Number: 54632-SS-X2
Material: stainless steel
Weight: 6.8
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 22 3/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.
Part Number: 54632-SS
Material: stainless steel
Weight: 3.40
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 11 3/8″
Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 12”
Total Side-to-Side: 24”
Part Number: 61702-UNI-X2
Material: cast iron
Weight: 12.9
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 61702-UNI-X2 for a set of two (2).
Part Number: 61702-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model
Part Number: CG-61P-CI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 51901
Material: porcelain steel wire
Weight: 6.13
Dimensions:
- Front-To-Back: 15 1/16″
- Side-To_Side: 25 1/4″
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 54632
Material: porcelain steel wire
Weight: 6.13
Dimensions:
- Front-To-Back: 14 15/16″
- Side-To_Side: 23 7/8″
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish. These grids have a slight bow in the middle and were designed to replace some original factory grids with this bow.
Part Number: 61702
Material: gloss cast iron
Weight: 11.0
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
E408M6 Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
OEM style collector box.
- Bolts onto burner with venturi
- Used with burners 11502, 15102, 15202, and 15402
- Use original electrode; replacement electrode # 04510 has been discontinued
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05152
Material: stainless steel
Weight: 0.1
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
Genuine OEM 21” wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
E408M6 Valves, Orifices, and Manifolds
Brass
spud orifice with 11/32” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200
Material: brass
Weight: 0.01
Dimensions: 0 7/16” x 0 7/16”
45° angled valve with extra long orifice snout. Accepts 11/32” x 32 threaded
spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.
Part Number: 38900
Material: brass
Weight: 0.3
Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models.
D-Value is 6 o'clock
Part Number: 37400
Material: brass
Weight: 0.3
E408M6 Accessories
High quality, long lasting ceramic briquettes. 59 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 59 briquetes will cover about 368 square inches. This is an area roughly 15” x 24”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA
Part Number: CLA-AC0394
Material: ceramic
Weight: 7.65
Dimensions: 2” x 2”
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Apple wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00230
Weight: 2.0
2 in 1 chrome plated turner / tong with PVC coated handle
Part Number: 40730
Material: chrome steel
Weight: 0.6
Dimensions: 14
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Charmglow grill model E408M6. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Charmglow BBQ parts worldwide
Back to Charmglow grill parts