Home > Huntington Grill Models > Huntington 6133-64Huntington Rebel 613364 5-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts for the Huntington 6133-64 (Rebel)
6133-64 (Rebel) Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
Genuine OEM Huntington Side Burner. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).
Part Number: 10390-E10
Weight: 0.4
$14.96
6133-64 (Rebel) Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
Genuine OEM Huntington
cooking grid.
Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)
Part Number: 52007-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 6 5/16
Material: cast iron
Weight: 3.10
$33.20
6133-64 (Rebel) FLAV-R-WAVE
Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 6133-64.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8
Dimension Side-to-Side: 6
Material: stainless steel
Weight: 1.14
$21.93
6133-64 (Rebel) Igniter Components
Genuine OEM Huntington electronic push-button 4-spade igniter.
- Uses AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
Genuine OEM Huntington electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
Genuine OEM Huntington 32 wire for side burner and other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
6133-64 (Rebel) Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 6133-64.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
6133-64 (Rebel) Knobs and Handles
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 6133-64.
Part Number: 10472-K431
Weight: 0.1
$5.15
CONTROL KNOB SMALL W/BA STRIP.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8
- Socket diameter: 5/16
- Knob shaft: 1/2
Part Number: 10472-K231
Weight: 0.1
$5.15
DOOR HANDLE RESIN * for Huntington model 6133-64.
Part Number: 21475-138
Weight: 1.0
$6.73
6133-64 (Rebel) Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
6133-64 (Rebel) Wheels and Castors
Rubber castor, 3 w/plate, locking for Huntington model 6133-64.
Part Number: 10892-23
Weight: 0.66
$6.87
6133-64 (Rebel) Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
$17.76
6133-64 (Rebel) Miscellaneous Repair Parts
LARGE PATRIOT NAMEPLATE for Huntington model 6133-64.
Part Number: 44089-60
Weight: 1.0
Image not available
$14.45
Hinge pin clip for Huntington model 6133-64.
Part Number: S21233
Weight: 0.01
$1.08
Washer for Huntington model 6133-64.
Part Number: S21255
Weight: 0.01
$1.08
6133-64 (Rebel) Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Huntington model 6133-64.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
LID BUMPER for Huntington model 6133-64.
Part Number: Y-11231
Weight: 0.01
$1.08
6133-64 (Rebel) Side Burners
SIDE BURNER GRID BLK 330/440/550. Grid for side burner. 9 diameter round and has two support prongs. Porcelain coated, glossy finish.
Note: Some owners manuals incorrectly list this part as 53139-98.
Part Number: 53140-981
Weight: .8
Image not available
$18.38
6133-64 (Rebel) Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31