Home > Kenmore Grill Models > Kenmore 2348187
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement BBQ grill parts for Kenmore model: 2348187
2348187 Burners
Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two V-12 adjustable universal venturis.
Part Number: EDSB+V-12
Material: stainless steel
Weight: 2.0
Dimensions: 7 1/4” x 15 1/2”
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502-72401
Material: stainless steel
Weight: 3.3
Dimensions: 15 7/8” x 8”
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502
Material: stainless steel
Weight: 2.5
Dimensions: 15 7/8” x 8”
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-72401
Material: cast iron
Weight: 8.0
Dimensions: 15 7/8” x 8”
cast iron burner head for Kenmore model 2348187.
Part Number: 20502
Material: cast iron
Weight: 7.7
Dimensions: 15 7/8” x 8”
2348187 Venturis
two venturi gaskets with screws for Kenmore model 2348187.
Part Number: 00400
Weight: 0.05
Dimensions: 3 1/16” x 1 1/4”
Single Gasket Kit Economy Burners for Kenmore model 2348187.
Part Number: SHK4
Weight: 0.01
72401 is a flexible and adjustable venturi that adjusts from 8” to 11”. Sold individually.
Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.
Part Number: 72401
Material: zinc plated steel
Weight: 0.3
Dimensions: 7 1/2” x 11”
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
2348187 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 50301
Material: porcelain steel wire
Weight: 4.4
Dimensions:
- Front-To-Back: 13 1/16″
- Side-To_Side: 19 5/8″
2348187 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Kenmore model 2348187.
Part Number: BG-4
Material: Carbon steel
Weight: 2.7
Dimensions:
- Front-To-Back: 11 5/8″
- Side-To_Side: 19″
2348187 Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
2348187 Valves, Orifices, and Manifolds
Brass
spud orifice with 5/16” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Material: brass
Weight: 0.01
Dimensions: 0 3/8” x 0 7/16”
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA
Part Number: VLV-28
Material: brass
Weight: 1.1
2348187 Accessories
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.
Part Number: 00220
Weight: 2.0
Ceramic briquette. Briquettes collect heat and radiate it to the food on the
cooking grids. They also help prevent flare-ups and keep the flames from actually touching the food allowing for more efficient and uniform heat distribution.
Designed primarily to work in stainless steel trays on Lynx, Alfresco, and other brand grills, these briquettes can be and often are used on any grill with an ordinary grate to support them.
- Individual briquettes measure 2” x 2”
- Set includes 28 ceramic briquettes
- More than one set may be required per grill model
Part Number: BQLYX
Material: ceramic
Weight: 4.0
Dimensions: 2” x 2”
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2” x 16”
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Kenmore 2348187. We have a large inventory of BBQ accessories such as BBQ tools, baskets, grill covers in our accessories section. 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts