Home > Kenmore Grill Models > Kenmore 2353680
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for the Kenmore 2353680
2353680 Burners
Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two V-12 adjustable universal venturis.
Part Number: EDSB+V-12
Material: stainless steel
Weight: 2.0
Dimensions: 7 1/4” x 15 1/2”
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502-72401
Material: stainless steel
Weight: 3.3
Dimensions: 15 7/8” x 8”
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502
Material: stainless steel
Weight: 2.5
Dimensions: 15 7/8” x 8”
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-72401
Material: cast iron
Weight: 8.0
Dimensions: 15 7/8” x 8”
cast iron burner head for Kenmore model 2353680.
Part Number: 20502
Material: cast iron
Weight: 7.7
Dimensions: 15 7/8” x 8”
2353680 Venturis
two venturi gaskets with screws for Kenmore model 2353680.
Part Number: 00400
Weight: 0.05
Dimensions: 3 1/16” x 1 1/4”
Single Gasket Kit Economy Burners for Kenmore model 2353680.
Part Number: SHK4
Weight: 0.01
72401 is a flexible and adjustable venturi that adjusts from 8” to 11”. Sold individually.
Used to replace venturis for virtually any grill model for which no exact fit venturi is available. Gasket & screws not included, see part numbers 00400 or SHK4.
Part Number: 72401
Material: zinc plated steel
Weight: 0.3
Dimensions: 7 1/2” x 11”
Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.
Part Number: SG-B
Material: stainless steel
Weight: 0.1
2353680 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 50301
Material: porcelain steel wire
Weight: 4.4
Dimensions:
- Front-To-Back: 13 1/16″
- Side-To_Side: 19 5/8″
2353680 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Kenmore model 2353680.
Part Number: BG-4
Material: Carbon steel
Weight: 2.7
Dimensions:
- Front-To-Back: 11 5/8″
- Side-To_Side: 19″
2353680 Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
2353680 Valves, Orifices, and Manifolds
Brass
spud orifice with 5/16” x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Material: brass
Weight: 0.01
Dimensions: 0 3/8” x 0 7/16”
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA
Part Number: VLV-28
Material: brass
Weight: 1.1
2353680 Accessories
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.
Part Number: 00281
Weight: .45
Dimensions: 11 7/8
Ceramic briquettes 48 pieces. Fits briquette trays
94751,
92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".
Part Number: 41648
Material: ceramic
Weight: 7.5
Dimensions: 2” x 2”
4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.
Part Number: 40070
Material: stainless steel
Weight: 2.12
Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Weight: 0.4
Dimensions: 9” x 13”
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Kenmore grill model 2353680. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts