Heat Plates for Rankam grills

Stainless steel replacement Heat Tent for some Rankam grills. Far better rust and corrosion resistance than the original porcelain steel version. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating, remove before use.

Part Number: 47183T-24-R
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.80

Porcelain steel Heat Plate for some Rankam grills. Sold individually.

Part Number: 91591
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

Stainless steel aftermarket flame tamer heat plate for some Rankam grills.

• Stainless equivalent of part 91591
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91591-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 1.0

Stainless steel Flame Tamer heat tent for some Rankam grills.

• Stainless equivalent of part 91751
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91751-SS
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

Porcelain steel Heat Diffuser for some Rankam grills. Sold individually.

Part Number: 92021
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 1.3

Porcelain steel Heat Diffuser for some Rankam grills. Sold individually.

Part Number: 92021-X2
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: porcelain steel
Weight: 2.6

Porcelain steel heat distribution plate for some Rankam grills. Sold individually.

Part Number: 92151
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Porcelain steel Flame Tamer for some Rankam grills.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

Porcelain steel Flame Tamers for some Rankam grills. SET OF TWO (2).

Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0

Universal adjustable stainless steel heat plate/Flame Tamer for some Rankam grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Rankam grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Porcelain steel Flame Tamer for some Rankam grills. Sold individually.

Part Number: 93281
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 1.7

Porcelain steel Flame Tamers for some Rankam grills.

SET OF EIGHT (8).

Part Number: 93281-X8
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 4 7/8”
Material: porcelain steel
Weight: 13.6

Stainless steel heat plate/ Flame Tamer for some Rankam grills. Sold individually, number required varies.

Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

Stainless steel heat diffuser for some Rankam grills. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0132
Dimension Front-to-Back: 11 13/16”
Dimension Side-to-Side: 8 7/16”
Material: stainless steel
Weight: 0.95

Stainless steel Heat Shield for some Rankam grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0134
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.69

Stainless steel heat plate/Flame Tamer for some Rankam grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.77

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Rankam grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X4
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.08

SET OF FIVE/5 PACK Stainless steel heat plate/Flame Tamer for some Rankam grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0158-X5
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 3.85

Stainless steel Heat Distribution Plate also known as a Flame Tamer and Heat Plate for some Rankam grills. Fits Member's Mark grill model GR2150901-MM-00. Sold individually, four required. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0420
Dimension Front-to-Back: 6”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: .90

Stainless steel Flame Tamer for some Rankam grills.

Part Number: NGHP2
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 1.0