Home > Kenmore Grill Models > Kenmore 258.2353081
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.
Replacement grill parts to fit Kenmore model: 258.2353081
258.2353081 Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 10502-72502
Dimensions: 15 7/8 x 8
Material: stainless steel
Weight: 3.5
$61.02
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10502
Dimensions: 15 7/8 x 8
Material: stainless steel
Weight: 2.5
$55.61
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-72502
Dimensions: 15 7/8 x 8
Material: cast iron
Weight: 8.0
$66.68
cast iron burner head for Kenmore model 258.2353081.
Part Number: 20502
Dimensions: 15 7/8 x 8
Material: cast iron
Weight: 7.7
$64.56
Standard stainless steel burner with adjustable legs. Comes with gasket and scews.
Part Number: EDSB
Dimensions: 7 1/4 x 15 1/2
Material: stainless steel
Weight: 1.5
$37.76
258.2353081 Venturis
L-shaped twin venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 72502
Dimensions: 5 1/16 x 3 1/8
Material: zinc plated steel
Weight: 0.6
$17.13
straight adjustable single venturi. Includes all necessary gaskets and screws/nuts.
Replaces Kenmore factory part# 10420-16
Part Number: 70301
Dimensions: 7
Material: zinc plated steel
Weight: 0.5
$15.59
Single Gasket Kit Economy Burners for Kenmore model 258.2353081.
Part Number: SHK4
Weight: 0.01
$4.02
258.2353081 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 50301
Dimension Front-to-Back: 13 1/16
Dimension Side-to-Side: 19 5/8
Material: porcelain steel wire
Weight: 4.4
$49.81
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 54501
Dimension Front-to-Back: 13
Dimension Side-to-Side: 19
Material: porcelain steel wire
Weight: 4.6
$49.81
258.2353081 Rock Grates
Rock grate for holding lava rock or ceramic briquettes for Kenmore model 258.2353081.
Part Number: BG-4
Dimensions: 11 5/8 x 19
Material: Carbon steel
Weight: 2.7
$27.40
carbon steel
rock grate for Kenmore model 258.2353081.
Replaces Kenmore factory part# 10222-21
Part Number: 91601
Dimensions: 12 1/2 x 21 11/32
Material: steel wire
Weight: 3.8
$25.03
258.2353081 Igniter Components
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15 wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
20 Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20 wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
$10.81
258.2353081 Knobs and Handles
Silver faced knob. Fits Falcon single control grills.
- Off position D-Value: 6:00 o'clock
- Knob diameter: 2
- Socket diameter: 5/16
- Knob shaft: 1/2
Replaces Kenmore factory part# 10472-32
Part Number: K-5B
Dimensions: 2
Material: N/A
Weight: 0.1
$13.95
258.2353081 Valves, Orifices, and Manifolds
Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
- For use with LP gas
- Includes two orifices drilled to #57 drill size
- Includes pre-assembled 45 degree angle fitting, not shown in photo
Made in USA Part Number: VLV-28
Material: brass
Weight: 1.1
$42.35
Brass
spud orifice with 5/16 x 32 thread size. Has #70
starter hole. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Dimensions: 0 3/8 x 0 7/16
Material: brass
Weight: 0.01
$6.95
258.2353081 Posts and Pedestals
4diameter, 48 tall, natural gas post without internals. Equivalent to Harpco #7402S0030 and MHP #P-4. Fits Arkla and other brands.
Replaces Kenmore factory part# 11002-41
Part Number: 01500
Dimensions: 48 x 4
Material: painted aluminum
Weight: 10.1
$113.49
258.2353081 Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
Durable 2 5/16 round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
10 Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2 x 2
Material: ceramic
Weight: 7.2
$47.58
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73