Heat Plates for Brinkmann grills

Stainless steel Heat Tent for some Brinkmann grills.

• Stainless equivalent of part 90242
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 90242-SS
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 1.0

Porcelain steel Heat Tents for some Brinkmann grills. Sold as a set of two (2).

Part Number: 90252
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 24 1/2”
Material: porcelain steel
Weight: 5.8

Porcelain steel Heat Tent for some Brinkmann grills. Single piece.

Part Number: 90252-1PC
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 12 1/4”
Material: porcelain steel
Weight: 3.5

Porcelain steel Heat Tent for some Brinkmann grills. Sold as a set of two (2).

Part Number: 90262
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 23 1/2”
Material: porcelain steel
Weight: 7.0

Porcelain steel heat tent for some Brinkmann grills. Single piece.

Part Number: 90262-1PC
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 11 3/4”
Material: porcelain steel
Weight: 3.5

Porcelain steel heat plate for some Brinkmann grills. Sold individually.

Part Number: 90611
Dimension Front-to-Back: 13 1/8”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.8

Stainless steel Flame Tamer heat tent for some Brinkmann grills.

• Stainless equivalent of part 91751
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91751-SS
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

Porcelain steel heat distribution plate for some Brinkmann grills. Sold individually.

Part Number: 92151
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 92311
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 0.63

Universal adjustable stainless steel heat plate/Flame Tamer for some Brinkmann grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Brinkmann grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Porcelain steel heat distribution plate for some Brinkmann grills. Sold individually.

Part Number: 92391
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 93181
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 3 3/16”
Material: porcelain steel
Weight: 1.4

Stainless steel aftermarket Flame Tamer / Heat Distribution Plate for some Brinkmann grills.

• Stainless equivalent of part 93181
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 93181-SS
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 1.0

Stainless steel Heat Distribution Plate for Sear Burner for some Brinkmann grills. Sold individually.

Part Number: 93661
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 5 1/8”
Material: stainless steel
Weight: 0.8

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 94251
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 3 1/8”
Material: porcelain steel
Weight: 1.0

Stainless steel Heat Distribution Plate for some Brinkmann grills.

• Stainless equivalent of part 94251
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 94251-SS
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 3 1/8”
Material: stainless steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 94281
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0

Flame Diffuser for some Brinkmann grills. Porcelain enameled, glossy finish.

Part Number: 96051
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/16”
Material: porcelain steel
Weight: 2.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 97311
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 0.8

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 97741
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 3 15/16”
Material: porcelain steel
Weight: 1.0

Stainless steel aftermarket Heat Distribution Plate / Flame Tamer for some Brinkmann grills.

• Stainless equivalent of part 97741
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 97741-SS
Dimension Front-to-Back: 17 7/8”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 98511
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: porcelain steel
Weight: 1.8

Porcelain steel Heat Tent for some Brinkmann grills. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.

This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.

Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6

Stainless steel aftermarket vented Heat Tent for some Brinkmann grills.

• Stainless equivalent of part 98531
• Sold individually
• Made in USA

Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 98551
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.8

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 99051
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 10 1/8”
Material: porcelain steel
Weight: 2.8

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 99311
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 99411
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 0.7

Porcelain steel Heat Tent for some Brinkmann grills. Sold individually.

Part Number: 99421
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 13/16”
Material: porcelain steel
Weight: 0.9

Porcelain steel Heat Tent for some Brinkmann grills. Sold individually.

Part Number: 99431
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 3 1/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 99441
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 2 5/16”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Tent for some Brinkmann grills.

Part Number: 99451
Dimension Front-to-Back: 16 5/16”
Dimension Side-to-Side: 2 3/8”
Material: porcelain steel
Weight: 1.0

Porcelain steel Heat Distribution Plate for some Brinkmann grills. Sold individually.

Part Number: 99491
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.7

Stainless steel heat tent for Brinkmann made grills for some Brinkmann grills. These stainless steel replacement plates are far superior to porcelain coated steel originals. Sold individually, number required varies.

Part Number: BMHP2
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 2.10

Stainless steel heat plate/ Flame Tamer for some Brinkmann grills. Sold individually, number required varies.

Part Number: BMHP7
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 3 3/16”
Material: stainless steel
Weight: 0.5

Stainless steel Heat Tent/ Flame Tamer for some Brinkmann grills. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

Brinkman Heat Distribution Plate for some Brinkmann grills.

Part Number: BMHP9
Dimension Front-to-Back: 17 11/16”
Dimension Side-to-Side: 10 1/4”
Material: stainless steel
Weight: 1.75

Stainless steel Flame Tamer for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 0.7

SET OF FOUR/4 PACK Stainless steel Flame Tamer for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001-X4
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 2.8

Heavy duty 304 grade stainless steel Heat Distribution Plate/Flame Tamer for some Brinkmann grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0051
Dimension Front-to-Back: 13 11/16”
Dimension Side-to-Side: 11 1/4”
Material: stainless steel
Weight: 2.75

Stainless steel Heat Shield for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0134
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.69

Stainless steel Heat Distribution Plate for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.66

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0135-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 2.64

Stainless steel Heat Distribution Plate for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 0.54

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Stainless steel Heat Distribution Plate/Flame Tamer for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.

Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

Stainless steel Heat Distribution Plate/Flame Tamer for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0159
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 1.12

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0159-X4
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 4.48

SET OF FIVE (5) PACK Stainless steel Heat Distribution Plates/Flame Tamers for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0159-X5
Dimension Front-to-Back: 17 9/16”
Dimension Side-to-Side: 6 5/16”
Material: stainless steel
Weight: 5.6

Stainless steel Heat Distribution Plate / Flame Tamer for some Brinkmann grills. Made in USA . The pull rod, used to lift the part from the grill, is replaced with a pull hole.

NOTE: Can also be used as a replacement for ceramic radients. This part replaces the radients and the rack that holds them.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use

Part Number: CLA-TS0160
Dimension Front-to-Back: 18 11/16”
Dimension Side-to-Side: 10”
Material: stainless steel
Weight: 1.8

Stainless steel Flame Tamer for some Brinkmann grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.90

SET OF THREE/3 PACK Stainless steel Flame Tamer for some Brinkmann grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 2.7

SET OF FOUR/4 PACK Stainless steel Flame Tamer for some Brinkmann grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X4
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 3.6

Stainless steel Heat Distribution Plate/Flame Tamer for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0215
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.6

SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers for some Brinkmann grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0215-X3
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.8