Heat Plates for Dyna-Glo grills

Porcelain steel heat plate for some Dyna-Glo grills.

Part Number: 90111
Dimension Front-to-Back: 13 5/8”
Dimension Side-to-Side: 3 1/8”
Material: porcelain steel
Weight: 0.7

Porcelain steel Heat Plate for some Dyna-Glo grills. Sold individually.

Part Number: 91591
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

Stainless steel aftermarket flame tamer heat plate for some Dyna-Glo grills.

• Stainless equivalent of part 91591
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91591-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 1.0

Universal adjustable stainless steel heat plate/Flame Tamer for some Dyna-Glo grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Dyna-Glo grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Stainless steel Flavor Grid for some Dyna-Glo grills. Sold individually.

Part Number: 92461
Dimension Front-to-Back: 15 7/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 2.12

Stainless steel Heat Tent for Sear Burner for some Dyna-Glo grills.

Part Number: 93671
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 1.0

stamped porcelain steel heat plate for some Dyna-Glo grills.

Part Number: 93681
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 3/8”
Material: stamped porcelain steel
Weight: 1.1

101-03005-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-03005.

Part Number: DG1-101-03005-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.0

101-03005-R-X2 Heat tent for some Dyna-Glo grills. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-03005.

Part Number: DG1-101-03005-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.0

104-13003-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

104-13003-R-X3 Heat tent for some Dyna-Glo grills. Set of three (3). Porcelain enameled steel.

Fits Dyna-Glo DGB390 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 104-13003.

Part Number: DG1-104-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R Heat tents for some Dyna-Glo grills. Porcelain enameled steel. SET OF THREE (3).

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X3
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 2.0

105-13003-R-X4 Heat tent for some Dyna-Glo grills. Set of four (4). Porcelain enameled steel..

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X4
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

105-13003-R-X5 Heat tent for some Dyna-Glo grills. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGE486, DGE530, DGF486, and M486 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 105-13003.

Part Number: DG1-105-13003-R-X5
Dimension Front-to-Back: 15 13/16”
Dimension Side-to-Side: 3 11/16”
Material: porcelain steel
Weight: 1.0

113-03005-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

113-03005-R-X4 Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Set of four..

Fits Dyna-Glo DGA480 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 113-03005.

Part Number: DG1-113-03005-R-X4
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

144-13003-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5

144-13003-R-X2 Heat tent for some Dyna-Glo grills. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 144-13003.

Part Number: DG1-144-13003-R-X2
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0

153-03005-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

153-03005-R-X5 Heat tent for some Dyna-Glo grills. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGA550 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 153-03005.

Part Number: DG1-153-03005-R-X5
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 5”
Material: porcelain steel
Weight: 1.0

70-01-179-R Heat tent for some Dyna-Glo grills. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-R-X4 Heat tent for some Dyna-Glo grills. Set of four (4). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 2.3

70-01-179-R-X5 Heat tent for some Dyna-Glo grills. Set of five (5). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X5
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

70-01-179-R-X6 Heat tent for some Dyna-Glo grills. Set of six (6). Porcelain enameled steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This heat tent replaces original Dyna-Glo part 70-01-179.

Part Number: DG1-70-01-179-R-X6
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

403-07001-03 Heat tent for some Dyna-Glo grills. Stainless steel. Sold individually.

Fits Dyna-Glo DGJ810CSB. May fit other models.

This heat tent replaces original Dyna-Glo part 403-07001-03.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG2-403-07001-03-R
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.85

403-07001-03-X3 Heat tent for some Dyna-Glo grills. Set of three (3). Stainless steel.

Fits Dyna-Glo DGJ810CSB. May fit other models.

This heat tent replaces original Dyna-Glo part 403-07001-03.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG2-403-07001-03-R-X3
Dimension Front-to-Back: 15 9/16”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 2.55

101-00301-04-R Heat tent for some Dyna-Glo grills. Stainless steel. Sold individually.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-101-03001-04-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 0.98

101-00301-04-R-X2 Heat tent for some Dyna-Glo grills. Set of two (2). Stainless steel.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-101-03001-04-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.96

70-01-179-SS Heat tent for some Dyna-Glo grills. Stainless steel. Sold individually.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70

70-01-179-SS-X4 Heat tent for some Dyna-Glo grills. Set of four (4). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8

70-01-179-SS-X5 Heat tent for some Dyna-Glo grills. Set of five (5). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X5
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 3.5

70-01-179-SS-X6 Heat tent for some Dyna-Glo grills. Set of six (6). Stainless steel.

Fits Dyna-Glo DGB494, DGB495, DGB515, DGB610, DGF493, DGF510 and DGF600 series grills. May fit other models.

This stainless heat tent replaces original Dyna-Glo part 70-01-179.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-70-01-179-SS-X6
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 4.2