Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your grill.
Igniter Components
70-03-102-R-X5 Ignition electrode and ignition wire. Set of five (5). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.
This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-70-03-102-R-X5
Material: ceramic
Weight: 0.05
$43.13
| Fits brands: Dyna-Glo |
70-03-102-R-X6 Ignition electrode and ignition wire. Set of six (6). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.
This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-70-03-102-R-X6
Material: ceramic
Weight: 0.05
$49.81
| Fits brands: Dyna-Glo |
70-03-105-R Electronic Ignitor. Battery powered push button ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-70-03-105-R
Weight: 0.7
$31.96
| Fits brands: Dyna-Glo |
105-13007-R Electronic Ignitor. Fits Dyna-Glo DGE530 series grills. May fit other models.
- 1.5 volt
- Has six (6) outlets)
- Uses a single AA battery (not included))
- Requires 7/8” mounting hole
This Electronic Ignition Module replaces original Dyna-Glo part 105-13007.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG2-105-13007-R
Weight: 0.3
Image not available
$31.96
| |
144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
- 1.5 volt
- Has two (2) outlets
- Uses 1 AAA battery (not included)
This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG2-144-13007-R
Weight: 0.3
$16.46
| Fits brands: Dyna-Glo |
70-03-105-R Electronic Ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.
- 1.5 volt
- Has six (6) outlets)
- Uses a single AA battery (not included))
- Requires 7/8” mounting hole
This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG2-70-03-105-R
Weight: 0.3
Image not available
$31.96
| |
Electronic igniter kit.
Includes:- B072218 Electronic igniter
- B100446 Collector box, electrode, & wire
- B069747 Grounding lug
- B072684 igniter ground wire
- B069743 Aluminum spacer
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DPP20
Weight: 0.4
$55.19
| Fits brands: Broilmaster |
Single outlet electronic ignitor. For 2005 models JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB
Weight: 0.2
$31.52
| Fits brands: MHP, PGS |
3 Prong Electronic Ignitor for Infrared Grills
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-EIB3
Weight: 0.2
$31.52
| Fits brands: MHP |
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
| Fits brands: MHP, PGS |
Hybrid burner collector box.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-HIB
Weight: 0.2
$13.80
| Fits brands: MHP |
Ignitor Box Assembly for Grill Replacement Parts for JNR, WNK, TJK
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IB
Weight: 0.2
$13.11
| Fits brands: MHP, PGS |
Infrared/Hybrid Ignitor Probe
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IIP
Weight: 0.02
$12.58
| Fits brands: MHP |
Infrared Hybrid Probe Shield
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IPS
Weight: 0.03
Image not available
$6.08
| Fits brands: MHP |
Rotary Ignitor Knob (Sometimes manufacturer supplies with white arrows or black imprinted arrows.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-K9
Weight: 0.1
$5.45
| Fits brands: MHP |
Flat washer for igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-M17
Weight: 0.1
$0.83
| Fits brands: MHP |
Single outlet rotary ignitor. Fits JNR, WNK, TJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RI
Weight: 0.1
$11.83
| Fits brands: MHP |
Rotary Ignitor kit for JNR, WNK, TJK.
Includes:- GG-RI Rotary spark generator
- GG-K9 Knob
- GG-IB Electrode & Collector box
- GG-RIW Connecting wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIC
Weight: 0.3
$34.60
| Fits brands: MHP |
12” connecting wire for use with rotary igniters. Does not fit battery-operated electronic igniters. Female
spade connector on one end connects to electrode, female
round connector on the other end connects to rotary igniter. FIts older JNR, WNK, and Patriot grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-RIW
Weight: 0.3
$6.44
| Fits brands: MHP |
Ceramic electrode with mounting bracket and 12” wire with
round connector. Fits SBA2 side burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-SBA5
Weight: 0.2
$11.92
| Fits brands: MHP |
Ignitor Module for SBA2 side burner.
- Uses AA batery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-SBA8
Weight: 0.2
$31.52
| Fits brands: MHP |
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
| Fits brands: Arkla, Arklamatic, BBQ-Pro, Charbroil, Charmglow, Coleman, Embermatic, Grillmaster, Kenmore, Kmart, Master Chef, Range Master, Sunbeam, Thermos |
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
| |
Ceramic electrode for use with CBP1-CI cast iron burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-24B
Weight: 0.3
$7.91
| Fits brands: Charbroil, Kenmore, Thermos |
Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-28B
Weight: 0.2
$9.60
| Fits brands: Charbroil, Kenmore, Thermos |
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
| Fits brands: Altima, Amana, Backyard Grill, Bakers & Chefs, Barbeques Galore, Blooma, Blue Ember, Brinkmann, Bull Outdoor, Capt'n Cook, Char-Griller, Charbroil, Coleman, Costco, Ducane, Dyna-Glo, Fiesta, Front Avenue, Grand Cafe, Grand Hall, Grand Royale, Grill Chef, Grillmaster, Home Depot, Huntington, Jenn-Air, Kenmore, Kmart, Lowes, Master Forge, Member's Mark, Mission, Nexgrill, PGS, Patio Chef, Range Master, Sams, Sonoma, Sure Heat, Surefire, The Source, Thermos, Turbo, Tuscany, Vermont Castings |
Collector Box & Ignitor Probe for CIMF1 Burner
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-49B
Weight: 0.15
$11.92
| Fits brands: Lowes, Master Forge, Mission |
Stainless Ignitor Shield for Alfresco
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-50B
Weight: 0.15
$36.60
| Fits brands: Alfresco |
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
$10.81
| Fits brands: Amberlight, Arkla, Arklamatic, Broilmaster, Charbroil, Charmglow, Costco, El Patio, Ellipse, Embermatic, Falcon, Grillmaster, Jacuzzi, Kalamazoo, Kenmore, Lazy Man, Olympia, PGS, Patio Kitchen, Patio Master, Pro Chef, Sterling, Sunbeam, Thermos, Turco, Warm Morning |
Ceramic electrode and 20” wire with female
round connector. Fits older Charmglow grills with rotary ignitor systems.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-8B
Weight: 0.1
$10.26
| Fits brands: Charmglow |
Weber Q120 & Q220 Spark Collector Box & Electronic Ignitor Module
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB11-B
Weight: 0.2
$34.27
| Fits brands: Weber |
DCS (9 Volt) 4-Prong Spark Generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB14-B
Weight: 0.40
$50.61
| Fits brands: Barbeques Galore, DCS |
Single Output Igniton Module. Fits many brands. Uses 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB15-B
Weight: 0.20
$27.14
| Fits brands: Ducane, Home Depot |
2 Prong Ignitor Module for Alfresco & Viking Grills
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB16-B
Weight: 1.0
$36.60
| |
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
| Fits brands: BBQ-Pro, Barbeques Galore, Broil-Mate, Bull Outdoor, Charbroil, Ducane, Emberglow, Grand Cafe, Grand Hall, Grill Chef, Grill Mate, Huntington, Jackson, Kenmore, Kmart, Lowes, Master Chef, Master Forge, Member's Mark, Nexgrill, PGS, Patio Chef, Perfect Flame, PermaSteel, Range Master, Sams, Tera Gear, The Source, Thermos, Turbo |
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
| Fits brands: Academy Sports, Amana, Aussie, BBQ-Pro, Bakers & Chefs, Barbeques Galore, Bass Pro Shops, Blooma, Blue Ember, Brinkmann, Capt'n Cook, Centro, Char-Griller, Charbroil, Charmglow, Coleman, Cook-On, Costco, Cuisinart, Ducane, Fiesta, Four Seasons, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, Grillmaster, Home Depot, Jenn-Air, Kenmore, King Griller, Kmart, Lowes, Master Chef, Master Forge, Member's Mark, NXR, Nexgrill, Oklahoma Joes, Outdoor Gourmet, Patio Chef, Patio Range, Perfect Flame, Perfect Glo, President's Choice, Range Master, Rankam, River Grille, Sams, Saturn, Savor Pro, Smoke Hollow, Sterling Forge, Stok, Sure Heat, Surefire, The Source, Thermos, Turbo, Tuscany, Uberhaus, Uniflame, XPS |
Battery powered push button igniter.
- Has six (6) spade type male connectors.
- Uses 1 AA battery (not supplied)
- Requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB6-B
Weight: 0.3
$31.52
| Fits brands: Blue Ember, Fiesta, Home Depot |
Weber Dual Outlet Electronic Module Fits E310, 320, 330 and S320. Also 2010 & Older Genisis. Includes heat shield, push button, battery, and electrode spark collector box/wire combo.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB8-B
Material: 1.0
Weight: 1.1
$36.68
| Fits brands: Weber |
Newer Weber (4) Outlet Electronic Module Fits E310 & E330. Includes Pushbutton & AA Battery. Requires a 7/8” mounting hole; inspect your control panel mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB9-B
Weight: 0.5
$41.67
| Fits brands: Weber |
Ignitor shield.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-DEF
Weight: 0.3
$13.45
| Fits brands: MHP |
Electronic Ignitor module.
- Two outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB
Weight: 0.3
$31.52
| Fits brands: MHP |
Hybrid Electronic Ignitor module.
- Four outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB4
Weight: 0.3
$31.52
| Fits brands: MHP |
Igniter collector box for GJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-IB
Weight: 0.15
$14.32
| Fits brands: MHP |
Replacement battery powered ignitor/spark generator and ground wire; has 7 outlets and two larger outlets: one for a ground wire, included, and one for the old remote switch wire, not included. Uses AA battery, not included, and requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: L3218-00-8002-R
Weight: 0.55
$37.41
| Fits brands: Master Forge, Lowes |
LX-12003-R Rotary 2-spark igniter.
NOTE: Not a Lynx branded product. This is an aftermarket part designed to replace original Lynx igniter part 12003.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: LX-12003-R
Weight: 0.2
$17.41
| Fits brands: Lynx |
LX-12004-R Rotary 3-spark igniter.
NOTE: Not a Lynx branded product. This is an aftermarket part designed to replace original Lynx igniter part 12004.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: LX-12004-R
Weight: 0.2
$21.96
| Fits brands: Lynx |
LX-12014-R Collector Box with Electrode and 15” wire.
NOTE: Not a Lynx branded product. This aftermarket part replaces three (3) original Lynx parts:
- 12014 electrode and 15” wire.
- 10077 Gas collector box.
- 14018 Screw.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: LX-12014-R
Material: stainless steel
Weight: 0.3
Image not available
$43.13
| Fits brands: Lynx |
102-03013-R Ignition electrode and ignition wire assembly. Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.
This Ignition electrode replaces original Master Forge part 102-03013.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: MF1-102-03013-R
Material: ceramic
Weight: 0.1
$6.81
| Fits brands: Lowes, Master Forge |
102-03013-R Ignition electrode and ignition wire assembly. Set of two (2). Fits Master Forge MFA350 series grills. Includes 8” wire. May fit other models.
This Ignition electrode replaces original Master Forge part 102-03013.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: MF1-102-03013-R-X2
Material: ceramic
Weight: 0.2
$13.42
| Fits brands: Lowes, Master Forge |
113-03020-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Master Forge MFA480 and MFA550 series grills. May fit other models.
This Ignition electrode replaces original Master Forge Electrode 113-03020 and Wire 113-03017.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: MF1-113-03020-R
Material: ceramic
Weight: 0.1
$12.47
| Fits brands: Lowes, Master Forge |