Igniter Components
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has two (2) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03322
Dimensions: 2 5/8” x 2”
Weight: 0.5
$35.57
| Fits brands: Charbroil, Coleman, Cuisinart, Home Depot, Kenmore, Kitchen Aid, Lowes, Nexgrill, Saber, Thermos, Weber |
Universal battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03330
Weight: 0.5
$18.48
| |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has three (3) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3
$35.57
| Fits brands: Blooma, Charbroil, Coleman, Cuisinart, Kenmore, Kmart, Lowes, Master Cook, Master Forge, Mr. Steak, NXR, Saber, Weber |
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
| |
Universal battery powered push button ignitor.
- 1.5 volt
- Has (5) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3
$19.43
| |
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
| |
Battery powered push button ignitor. Inspect the mounting hole in your control panel; see bullet points below.
- Requires 15/16” mounting hole
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (included)
- 1.5 volt
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03341
Weight: 0.9
$35.68
| Fits brands: Weber |
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
| Fits brands: Academy Sports, Bass Pro Shops, Brinkmann, Broilmaster, Centro, Charbroil, Freedom, Grand Hall, GrillSmith, Home Depot, Kenmore, Kmart, Master Chef, Member's Mark, Nexgrill, North American Outdoors, Outdoor Gourmet, Patio Chef, Rankam, Sams, The Source, Thermos |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03344
Dimensions: 2” x 2 1/2”
Weight: 0.5
$37.92
| Fits brands: Charbroil, Coleman, Cuisinart, Home Depot, Kenmore, Kitchen Aid, Kmart, Member's Mark, Nexgrill, Saber, Thermos |
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
| |
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
| Fits brands: Academy Sports, Aussie, Bakers & Chefs, Barbeques Galore, Charbroil, Charmglow, Costco, Duro, Grand Hall, Grand Isle, Grillmaster, Home Depot, Jenn-Air, Kenmore, Kirkland Signature, Kitchen Aid, Kmart, Lowes, Master Chef, Member's Mark, NXR, Nexgrill, Outdoor Gourmet, Perfect Flame, Range Master, Rankam, Sams, Strada, Teton Grill, The Source, Thermos, Uberhaus |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part
03621. Inspect your system.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7
$39.89
| Fits brands: Charbroil, Coleman, Costco, Cuisinart, Duro, Fire King, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Kmart, Lowes, Master Forge, Member's Mark, Mr. Steak, Nexgrill, Perfect Flame, Saber, Sams, Tera Gear |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has six (6) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7
$39.89
| Fits brands: Academy Sports, Charbroil, Costco, Cuisinart, Home Depot, Jenn-Air, Kenmore, Kitchen Aid, Kmart, Lowes, Master Cook, Master Forge, Mr. Steak, Nexgrill, Outdoor Gourmet, Saber, Signateur, Weber |
Battery powered 9-volt spark generator with six outlets and remote push-button. Wiring not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03360
Weight: 0.7
$50.61
| Fits brands: GE |
Replacement electrode for use with burner 13361.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03361
Material: ceramic
Weight: 0.2
$12.99
| Fits brands: Costco, Duro, Grill King, Jenn-Air, Lowes, Member's Mark, Nexgrill, Sams, Tera Gear, Uberhaus |
Push-button ignitor switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03369
Dimensions: 0 3/4” x 0 3/4”
Weight: 0.1
$8.90
| |
4-outlet 9 volt spark generator. Use jumper wire 03197 for 2-outlet applications.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03370
Dimensions: 3 7/8” x 2”
Weight: 0.5
$58.08
| Fits brands: Coleman, Outback |
2-outlet AA spark generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03372
Weight: 0.5
$67.78
| Fits brands: Coleman |
4-outlet spark generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03373
Material: plastic
Weight: 0.4
$69.02
| Fits brands: Weber |
-outlet spark generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03375
Weight: 0.4
$37.97
| |
-outlet spark generator
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03376
Weight: 0.4
$37.97
| |
Battery powered 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.
WARNING: Before ordering this 7-outlet ignitor, please inspect the spacing inside your grill for this part. The original ignitor was 2 1/2” x 2 5/8”. The new version is longer 3 1/8” x 2” and it has two ”humps” on each end. The original only had one ”hump.” Please determine that the larger version will fit into your grill.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03377
Weight: 0.5
$38.00
| Fits brands: Brinkmann, Home Depot, Master Forge, Nexgrill |
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
| |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has seven (7) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03387
Dimensions: 3 3/8” x 2”
Weight: 0.5
$39.89
| Fits brands: Costco, Home Depot, Kenmore, Kirkland Signature, Kitchen Aid, Kmart, Master Forge, NXR, Nexgrill |
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has eight (8) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 2 5/8”
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03388
Dimensions: 3 1/2” x 2”
Weight: 0.5
$38.00
| Fits brands: Costco, Home Depot, Kitchen Aid, Nexgrill |
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
| Fits brands: Arkla, Arklamatic, Aussie, BBQ-Pro, Backyard Grill, Bakers & Chefs, Barbeques Galore, Centro, Char-Griller, Charbroil, Charmglow, Coleman, Ducane, Embermatic, Grand Cafe, Grand Hall, Grand Royale, Great Outdoors, Grill Boss, Grill Chef, Grillmaster, Kenmore, Kmart, Lazy Man, Martha Stewart, Master Chef, Member's Mark, Outback, PGS, Patio Chef, Patio Range, Phoenix, Range Master, RevoAce, Sams, Saturn, Sunbeam, Thermos, Turbo, Uniflame, Vermont Castings, Weber |
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.35
| Fits brands: Academy Sports, Aussie, BBQ-Pro, Backyard Grill, Brinkmann, Broilmaster, Char-Griller, Charbroil, Coleman, Cuisinart, Dyna-Glo, Grand Hall, Great Outdoors, Grill Boss, Grill Chef, Grill Mate, Igloo, Jenn-Air, Kalamazoo, Kenmore, Kmart, Lazy Man, Lowes, Martha Stewart, Master Chef, Outback, Outdoor Gourmet, PGS, Range Master, RevoAce, Tera Gear, Thermos, Uniflame, Vermont Castings, Viking, Warm Morning, Weber |
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
| Fits brands: Academy Sports, Altima, Amana, Arkla, Arklamatic, Aussie, BBQ Grillware, BBQ-Pro, BBQTEK, Backyard Grill, Bakers & Chefs, Barbeques Galore, Bass Pro Shops, Better Homes and Gardens, Blooma, Blue Ember, Brinkmann, Broil Chef, Broil-Mate, Browning, Bull Outdoor, Capt'n Cook, Centro, Char-Griller, Charbroil, Charmglow, Coleman, Cook-On, Costco, Cuisinart, DCS, Ducane, Duro, Dyna-Glo, Electrolux, Emberglow, Embermatic, Expert Grill, Fiesta, Four Seasons, Freedom, Frigidaire, Front Avenue, Frontgate, Grand Cafe, Grand Hall, Grand Royale, Great Outdoors, Grill Boss, Grill Chef, Grill King, Grillmaster, Grill Mate, GrillPro, GrillSmith, Grillada, Home Depot, Huntington, Igloo, Jackson, Jenn-Air, Kalamazoo, Kenmore, King Griller, Kmart, Landmann, Lazy Man, Life@Home, Lowes, MHP, Master Chef, Master Forge, Member's Mark, Mission, NXR, Napoleon, Nexgrill, North American Outdoors, Oklahoma Joes, Outback, Outdoor Gourmet, Patio Chef, Patio Master, Patio Range, Perfect Flame, Perfect Glo, PermaSteel, Phoenix, President's Choice, Range Master, Rankam, RevoAce, River Grille, Sams, Saturn, Savor Pro, Signateur, Smoke Canyon, Smoke Hollow, Sonoma, Sterling Forge, Stok, Sunbeam, Sure Heat, Surefire, Tera Gear, The Source, Thermos, Turbo, Tuscany, Uberhaus, Uniflame, Vermont Castings, Viking, Weber, XPS |
Ignition connection wires used to connect battery powered spark generators to electrodes. SET OF FOUR (4) 47” wires.
- Each wire has female spade connectors on one end and square plastic connectors on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610-X4
Weight: 0.2
$32.32
| Fits brands: Academy Sports, Member's Mark, Outdoor Gourmet, Rankam, Sams |
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
| Fits brands: Academy Sports, Altima, Amana, Arkla, Arklamatic, Aussie, BBQ-Pro, BBQTEK, Backyard Grill, Bakers & Chefs, Barbeques Galore, Bass Pro Shops, Better Homes and Gardens, Blooma, Blue Ember, Brinkmann, Broil Chef, Broil-Mate, Browning, Bull Outdoor, Capt'n Cook, Centro, Char-Griller, Charbroil, Charmglow, Coleman, Cook-On, Costco, Cuisinart, DCS, Ducane, Duro, Dyna-Glo, Emberglow, Embermatic, Expert Grill, Fiesta, Four Seasons, Freedom, Front Avenue, Grand Cafe, Grand Hall, Grand Royale, Great Outdoors, Grill Boss, Grill Chef, Grillmaster, Grill Mate, GrillPro, GrillSmith, Grillada, Home Depot, Huntington, Igloo, Jackson, Jenn-Air, Kalamazoo, Kenmore, King Griller, Kitchen Aid, Kmart, Landmann, Lazy Man, Life@Home, Lowes, MHP, Martha Stewart, Master Chef, Master Forge, Member's Mark, Mission, NXR, Napoleon, Nexgrill, North American Outdoors, Oklahoma Joes, Outback, Outdoor Gourmet, PGS, Patio Chef, Patio Master, Patio Range, Perfect Flame, Perfect Glo, PermaSteel, Phoenix, President's Choice, Range Master, Rankam, RevoAce, River Grille, Sams, Saturn, Savor Pro, Smoke Canyon, Smoke Hollow, Sonoma, Sterling Forge, Stok, Sunbeam, Sure Heat, Surefire, Tera Gear, The Source, Thermos, Turbo, Tuscany, Uberhaus, Uniflame, Vermont Castings, Weber, XPS |
Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1
$6.26
| Fits brands: Academy Sports, Charbroil, Costco, Cuisinart, Duro, Grand Hall, Home Depot, Jenn-Air, Kenmore, Kirkland Signature, Kitchen Aid, Kmart, Lowes, Master Cook, Master Forge, Member's Mark, Mr. Steak, NXR, Nexgrill, Outdoor Gourmet, Perfect Flame, Saber, Sams, Signateur, Tera Gear, Weber |
Ceramic electrode with bendable wire, mounting bracket, and male spade connector.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03700
Material: ceramic
Weight: 0.1
$6.33
| Fits brands: Arkla, Arklamatic, Embermatic, Kenmore |
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
| Fits brands: Amberlight, Arkla, Arklamatic, BBQ-Pro, Backyard Grill, Blue Ember, Brinkmann, Broil-Mate, Broilmaster, Charbroil, Charmglow, Costco, Ducane, El Patio, Ellipse, Embermatic, Falcon, Fiesta, Grand Hall, Great Outdoors, Grill Boss, Grill Chef, Grillmaster, Grill Mate, GrillPro, Home Depot, Huntington, Jacuzzi, Jenn-Air, Kalamazoo, Kenmore, Kitchen Aid, Kmart, Lazy Man, Lowes, Master Forge, Member's Mark, Nexgrill, Olympia, Outback, PGS, Patio Chef, Patio Kitchen, Patio Master, Phoenix, Pro Chef, RevoAce, Roper, Sams, Sterling, Sunbeam, Tera Gear, Thermos, Turco, Uniflame, Warm Morning, West Bend |
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
| |
Collector box, ceramic electrode, glow wire spring, and 23” wire with female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03758
Material: ceramic
Weight: 0.2
$12.38
| Fits brands: Ducane |
Collector box and ceramic electrode with male
spade connector. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, but no ground wire, see ground wire 03620.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03800
Material: ceramic
Weight: 0.2
$10.38
| Fits brands: Grand Hall, Great Outdoors, Grill Chef, Grill Mate, Kalamazoo, Kmart, Lazy Man, Martha Stewart, PGS, Vermont Castings |
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03821
Material: ceramic
Weight: 0.1
$10.35
| Fits brands: Brinkmann, Home Depot |
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
| Fits brands: Amberlight, Arkla, Arklamatic, Backyard Grill, Blue Ember, Brinkmann, Broil-Mate, Broilmaster, Charbroil, Charmglow, El Patio, Ellipse, Embermatic, Falcon, Fiesta, Grand Hall, Great Outdoors, Grill Boss, Grill Chef, Grillmaster, Grill Mate, GrillPro, Huntington, Jacuzzi, Kalamazoo, Kenmore, Lowes, Master Forge, Olympia, Outback, PGS, Patio Chef, Patio Kitchen, Patio Master, Phoenix, Pro Chef, RevoAce, Roper, Sterling, Sunbeam, Thermos, Turco, Uniflame, Warm Morning, West Bend |
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
| Fits brands: Academy Sports, Aussie, BBQ Grillware, BBQ-Pro, BBQTEK, Backyard Grill, Bass Pro Shops, Better Homes and Gardens, Bond, Browning, Char-Griller, Dyna-Glo, Expert Grill, Fire King, Great Outdoors, Grill Boss, Grill Chef, Home Depot, Igloo, Jenn-Air, Kenmore, King Griller, Life@Home, Lowes, Master Forge, Medallion, Member's Mark, North American Outdoors, Outdoor Gourmet, Perfect Flame, Pit Boss, President's Choice, Rankam, RevoAce, Sams, Smoke Hollow, Tera Gear, Uniflame, Vermont Castings, XPS |
Burner mounted electrodes with male spade connectors. SET OF TWO (2). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04010-X2
Material: ceramic
Weight: 0.1
Image not available
$12.96
| |
Burner mounted electrodes with male spade connectors. SET OF THREE (3). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04010-X3
Material: ceramic
Weight: 0.15
Image not available
$19.01
| Fits brands: Member's Mark, Rankam, Sams |
Burner mounted electrodes with male spade connectors. Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04010-X4
Material: ceramic
Weight: 0.2
Image not available
$24.84
| Fits brands: Academy Sports, Outdoor Gourmet |
Burner mounted electrodes with male spade connectors. SET OF FIVE (5). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04010-X5
Material: ceramic
Weight: 0.25
Image not available
$30.45
| |
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
| Fits brands: Academy Sports, BBQ-Pro, Brinkmann, Browning, Coleman, Costco, GrillSmith, Kenmore, Kmart, Lowes, Master Forge, Member's Mark, Outdoor Gourmet, Rankam, Sams, Signateur |
Burner mounted electrodes with male spade connectors. SET OF TWO (2). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04022-X2
Material: ceramic
Weight: 0.2
$13.42
| Fits brands: Member's Mark, Rankam, Sams |
Burner mounted electrodes with male spade connectors. SET OF THREE (3). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04022-X3
Material: ceramic
Weight: 0.3
$19.69
| Fits brands: Academy Sports, Member's Mark, Outdoor Gourmet, Sams |
Burner mounted electrodes with male spade connectors. SET OF FOUR (4). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04022-X4
Material: ceramic
Weight: 0.4
$25.74
| Fits brands: Academy Sports, Member's Mark, Outdoor Gourmet, Rankam, Sams |
Burner mounted electrodes with male spade connectors. SET OF FIVE (5). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04022-X5
Material: ceramic
Weight: 0.5
$31.55
| Fits brands: Academy Sports, Costco, Member's Mark, Outdoor Gourmet, Rankam, Sams, Signateur |
Ceramic electrode with male
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04100
Material: ceramic
Weight: 0.1
$7.31
| Fits brands: Charmglow, Member's Mark, Sams |
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04110
Material: ceramic
Weight: 0.1
$8.47
| Fits brands: Stok |