Every Igniter Component we have

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

• UP-9B Snap-in push-button piezo ignitor
• IG-13B Collector box, electrode, and 19 1/2” wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

• UP-7B Threaded push-button piezo ignitor with external grounding tab
• IG-13B Collector box, electrode, and wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008090-000-R Two prong Electrode. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008090-000-R-X2 SET OF TWO (2) Two-prong Electrodes. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008090-000-R-X3 SET OF THREE (3) two-prong Electrodes. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287 and PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008090-000-R Two prong Electrode. Also known in Viking documentation as ”PB040287 IGNITOR KIT”. This part also replaces parts PB040287, PB040176

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008090-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008091-000-R Electrode with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008091-000-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

008091-000-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”PB040288 IGNITOR KIT”. This part replaces: PB040288, PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part 008091-000.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PA020022-R Rotary piezo spark generator with single round connector outlet. Also known in Viking documentation as ”SINGLE OUTPUT IGNITION SWITCH-(VGBQ (1691.06)”.

• Includes knob part# PB010156
• No battery required.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020022.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PA020023-R 2-Outlet rotary piezo spark generator. Also known in Viking documentation as ”DUAL OUTPUT IGNITION SWITCH-(VGBQ) 1691-04”.

• Includes knob part# PB010156
• No battery required.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking ignition part PA020023.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

VIK-PA020036-R Spark Module. 4-Spark electronic ignition module. Requires 1 AA battery (not included).

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking grate part PA020036.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PB040176-R Two-prong Electrode. Also known in Viking documentation as ”IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040176.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PB040179-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PB040179-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER IGNITER” and ”SMOKER SPARK IGNITOR”.

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040179.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PB040287-R Two-prong Electrode. Also known in Viking documentation as ”GRILL BURNER IGNITER”.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040287.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

PB040288-R Electrode with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

B040288-R-X2 SET OF TWO (2) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

B040288-R-X3 SET OF THREE (3) Electrodes with m spade wide connection. Also known in Viking documentation as ”SMOKER BURNER IGNITER”. This part replaces: PB040288 and PB040179

Includes short adapter wire (not shown) to convert the wide male spade conector on the electrode to a standard male spade connector. This allows the use of wires with standard spade connectors.

NOTE: Not a VIKING branded product. This is an aftermarket part designed to replace original Viking part PB040288.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

For more information about ignition systems and components, please see article Ignition 101 in our help center.